ATSAM4SA16CA-AN vs ATSAM4S8CB-CFN तुलना
विस्तृत दोनों ओर की तुलना ATSAM4SA16CA-AN द्वारा Microchip Technology और ATSAM4S8CB-CFN द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4SA16CA-AN - 120MHz Cortex-M4 MCU 1MB Flash LQFP-100
ATSAM4SA16CA-AN ✓ सक्रियMicrochip Technology
ATSAM4S8CB-CFN - 120MHz Cortex-M4 MCU, 512KB Flash, 100-VFBGA | Microchip
ATSAM4S8CB-CFN ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4SA16CA-AN | ATSAM4S8CB-CFN |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Processor | ARM Cortex-M4 with FPU | — |
| Core Size | 32-Bit | — |
| Maximum Clock Speed | 120 MHz | — |
| Program Memory (Flash) | 1024 KB (1 MB) | 512 KB (512K x 8) |
| RAM Size | 128 KB | — |
| Operating Voltage Range | 1.62 V to 3.6 V | — |
| Number of I/O Pins | 79 | — |
| पैकेज | 100-LQFP (LFQFP) | 100-ball VFBGA, 7x7 mm, 0.65 mm pitch |
| ऑपरेटिंग तापमान | -40 °C to +105 °C (Extended Industrial) | — |
| Connectivity | EBI/EMI, I²C, IrDA, Memory Card, SPI, SSC, UART/USART, USB | — |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT | — |
| Data Converters | A/D 16x12b + D/A 2x12b | — |
| सप्लाई वोल्टेज | 1.62 V (min) to 3.6 V (max) | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount (BGA) |
| RoHS स्थिति | Compliant (Green) | Compliant |
| Lead-Free / Halogen-Free | Yes (Green, MRL A) | — |
| Part Status | Active | — |
| Series | SAM4S | — |
| Oscillator Type | Internal + External | — |
| EEPROM/Backup SRAM | [DATA_NEEDED: backup SRAM size] | — |
| Core | — | ARM Cortex-M4 with FPU |
| Core Architecture | — | ARM 32-bit RISC |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 120 MHz |
| SRAM | — | 128 KB |
| Supply Voltage Range | — | 1.62 V to 3.6 V |
| Operating Temperature (Industrial) | — | -40C to +85C |
| Operating Temperature (Green, MRL B) | — | -40C to +105C |
| USB | — | USB 2.0 Full-Speed Device with on-chip transceiver |
| CAN | — | 2x CAN 2.0A/B controllers |
| ADC | — | 12-bit, up to 16 channels, 1 Msps |
| DAC | — | 2x 12-bit DAC |
| Timers | — | Multiple 16-bit and 32-bit timers, PWM, RTC |
| Communication Interfaces | — | UART/USART, SPI, TWI (I2C), I2S, USB, CAN |
| External Bus Interface | — | 16-bit Static Memory Controller (EBI) |
| Supply Current (Active, 100 MHz) | — | approximately 30 mA |
| Supply Current (Backup, RTC) | — | approximately 3 uA at 1.8 V |
| MSL (Moisture Sensitivity) | — | MSL3 (per BGA package) |