ATSAM4SA16CB-CN vs ATSAM4S8CB-CFN तुलना
विस्तृत दोनों ओर की तुलना ATSAM4SA16CB-CN द्वारा Microchip Technology और ATSAM4S8CB-CFN द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4SA16CB-CN - SAM4S Cortex-M4 MCU 120MHz 1MB Flash | Microchip
ATSAM4SA16CB-CN ✓ सक्रियMicrochip Technology
ATSAM4S8CB-CFN - 120MHz Cortex-M4 MCU, 512KB Flash, 100-VFBGA | Microchip
ATSAM4S8CB-CFN ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4SA16CB-CN | ATSAM4S8CB-CFN |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M4 (32-bit) with single-precision FPU | ARM 32-bit RISC |
| Maximum CPU Frequency | 120 MHz | — |
| Performance | 150 DMIPS / 1.25 DMIPS per MHz | — |
| Program Flash Memory | 1 MB (1024 KB) | — |
| SRAM | 160 KB | 128 KB |
| पैकेज | 100-ball TFBGA 9x9 mm, 0.8 mm pitch | 100-ball VFBGA, 7x7 mm, 0.65 mm pitch |
| Operating Voltage | 1.62 V to 3.6 V | — |
| ऑपरेटिंग तापमान | -40 C to +105 C (extended industrial) | — |
| ADC | 12-bit, 16-channel, up to 1 Msps | 12-bit, up to 16 channels, 1 Msps |
| Analog Comparators | 2 | — |
| USB | USB 2.0 Full-Speed Device + Host (on-chip transceiver) | USB 2.0 Full-Speed Device with on-chip transceiver |
| USART / UART | 4 USARTs + 2 UARTs (LIN-capable) | — |
| SPI | 3 (one for HS SD/MMC) | — |
| TWI (I2C) | 2 | — |
| SD/MMC Interface | HS-MCI 4-bit, SD/SDHC/MMC compatible | — |
| PWM Timer | 16-bit, 4 channels | — |
| GPIO Count | 79 (maximum) | — |
| DMA Channels | 24 (PDC + DMA controller) | — |
| Cryptography | [DATA_NEEDED: hardware crypto accelerator presence] | — |
| JEDEC Package Code | S-PBGA-B100 | — |
| माउंटिंग प्रकार | Surface Mount (BGA) | Surface Mount (BGA) |
| MSL स्तर | 3 (168 hours) | — |
| RoHS स्थिति | Compliant | Compliant |
| Silicon Revision | Revision B (recommended for new designs) | — |
| Core | — | ARM Cortex-M4 with FPU |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 120 MHz |
| Program Memory (Flash) | — | 512 KB (512K x 8) |
| Supply Voltage Range | — | 1.62 V to 3.6 V |
| Operating Temperature (Industrial) | — | -40C to +85C |
| Operating Temperature (Green, MRL B) | — | -40C to +105C |
| CAN | — | 2x CAN 2.0A/B controllers |
| DAC | — | 2x 12-bit DAC |
| Timers | — | Multiple 16-bit and 32-bit timers, PWM, RTC |
| Communication Interfaces | — | UART/USART, SPI, TWI (I2C), I2S, USB, CAN |
| External Bus Interface | — | 16-bit Static Memory Controller (EBI) |
| Supply Current (Active, 100 MHz) | — | approximately 30 mA |
| Supply Current (Backup, RTC) | — | approximately 3 uA at 1.8 V |
| MSL (Moisture Sensitivity) | — | MSL3 (per BGA package) |