ATSAM4SD16BA-ANR vs ATSAM4SD16BA-AUR तुलना
विस्तृत दोनों ओर की तुलना ATSAM4SD16BA-ANR द्वारा Microchip Technology और ATSAM4SD16BA-AUR द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4SD16BA-ANR - 1MB Flash Cortex-M4 MCU 120MHz | Microchip
ATSAM4SD16BA-ANR ✓ सक्रियMicrochip Technology
ATSAM4SD16BA-AUR - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4SD16BA-AUR ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4SD16BA-ANR | ATSAM4SD16BA-AUR |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M4 with FPU and DSP extensions | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 120 MHz | — |
| Core Mark Performance | 1.25 DMIPS/MHz (Dhrystone 2.1) | — |
| Flash Memory | 1024 KB (dual-bank, in-application programmable) | — |
| SRAM | 128 KB (plus 16 KB backup SRAM) | 128 KB |
| Supply Voltage (VDDIO/VDDCORE) | 1.62 V to 3.6 V | — |
| पैकेज | 64-LQFP, 10 x 10 mm, 0.5 mm pitch (AN suffix) | 64-pin LQFP (10x10 mm) |
| I/O Pins | Up to 47 GPIO | — |
| ADC | 12-bit, up to 1 Msps, 16 channels | 12-bit, up to 1 Msps, 8 channels |
| DAC | 12-bit, 2 channels | — |
| USB | USB 2.0 Full-Speed Device/Host/OTG | USB 2.0 Full-Speed Device/Host |
| SD/MMC | 1 x High-Speed SD/MMC/SDIO | — |
| USART/UART | 6 x USART + 2 x UART | — |
| SPI | 2 x SPI (one with extended FIFO) | 2 interfaces |
| TWI (I2C-compatible) | 3 x TWI | — |
| External Bus Interface | 16-bit EBI (SRAM/SDRAM/NOR/NAND) | — |
| Timers | 3 x 16-bit TC + 1 x 16-bit RTT + 1 x RTC | — |
| ऑपरेटिंग तापमान | -40 C to +105 C (industrial) | -40 C to +85 C (Industrial) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount (LQFP) |
| RoHS स्थिति | Compliant | Compliant (Green) |
| Core Architecture | — | ARM Cortex-M4 (32-bit) with FPU |
| Maximum CPU Clock | — | 120 MHz |
| Program Flash Memory | — | 1 MB (1M x 8) |
| Supply Voltage (VDDIO) | — | 1.62 V to 3.6 V |
| UART/USART | — | Up to 3 channels |
| TWI (I2C) | — | 2 interfaces |
| DMA Channels | — | 16 (peripheral) |
| Timers/Counters | — | TC block, multiple 16-bit channels |
| PWM Channels | — | Multiple, hardware-supported |
| Watchdog / Brown-out Reset | — | Yes (integrated) |
| Packing Media | — | Tape and Reel (1500 per reel) |