ATSAM4SD16BA-AU vs ATSAM4SD16BA-ANR तुलना
विस्तृत दोनों ओर की तुलना ATSAM4SD16BA-AU द्वारा Microchip Technology और ATSAM4SD16BA-ANR द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4SD16BA-AU - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4SD16BA-AU ✓ सक्रियMicrochip Technology
ATSAM4SD16BA-ANR - 1MB Flash Cortex-M4 MCU 120MHz | Microchip
ATSAM4SD16BA-ANR ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4SD16BA-AU | ATSAM4SD16BA-ANR |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M4F (32-bit) | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 120 MHz | 120 MHz |
| Flash Memory | 1 MB (1M x 8) | 1024 KB (dual-bank, in-application programmable) |
| SRAM | 160 KB | 128 KB (plus 16 KB backup SRAM) |
| Instruction Cache | 2 KB | — |
| FPU | Single-precision (IEEE 754) | — |
| DSP Extensions | Yes (single-cycle MAC, SIMD) | — |
| Memory Protection Unit | Yes (MPU) | — |
| Supply Voltage (VDDIO) | 1.62 V to 3.6 V | — |
| ऑपरेटिंग तापमान | -40 C to +85 C (industrial) | -40 C to +105 C (industrial) |
| पैकेज | 64-pin LQFP (10x10 mm) | 64-LQFP, 10 x 10 mm, 0.5 mm pitch (AN suffix) |
| USB | USB 2.0 Full-Speed Device/Host with on-chip transceiver | USB 2.0 Full-Speed Device/Host/OTG |
| CAN | 1 x CAN 2.0B | — |
| ADC | 12-bit, up to 1 Msps, 16 channels | 12-bit, up to 1 Msps, 16 channels |
| DAC | 12-bit, 2 channels | 12-bit, 2 channels |
| Timers | TC x6, SysTick, RTC | 3 x 16-bit TC + 1 x 16-bit RTT + 1 x RTC |
| Communication | USART x4, TWI (I2C) x3, SPI x2, HS-SPI x1 | — |
| DMA Channels | 16 | — |
| RoHS स्थिति | Compliant | Compliant |
| Pin-to-pin Compatibility | SAM3N, SAM3S (64/100-pin), SAM7S legacy | — |
| Core | — | ARM Cortex-M4 with FPU and DSP extensions |
| Core Mark Performance | — | 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Supply Voltage (VDDIO/VDDCORE) | — | 1.62 V to 3.6 V |
| I/O Pins | — | Up to 47 GPIO |
| SD/MMC | — | 1 x High-Speed SD/MMC/SDIO |
| USART/UART | — | 6 x USART + 2 x UART |
| SPI | — | 2 x SPI (one with extended FIFO) |
| TWI (I2C-compatible) | — | 3 x TWI |
| External Bus Interface | — | 16-bit EBI (SRAM/SDRAM/NOR/NAND) |
| माउंटिंग प्रकार | — | Surface Mount |