ATSAM4SD16CA-CU vs ATSAM4SD16CA-AUR तुलना
विस्तृत दोनों ओर की तुलना ATSAM4SD16CA-CU द्वारा Microchip Technology और ATSAM4SD16CA-AUR द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4SD16CA-CU - 120MHz Cortex-M4 MCU, 1MB Flash | Microchip
ATSAM4SD16CA-CU ✓ सक्रियMicrochip Technology
ATSAM4SD16CA-AUR - 120MHz Cortex-M4 1MB Flash MCU | Microchip
ATSAM4SD16CA-AUR ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4SD16CA-CU | ATSAM4SD16CA-AUR |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M4 | — |
| Core Architecture | ARMv7E-M (Thumb-2 + DSP) | ARM Cortex-M4 with DSP extensions and Thumb-2 |
| Maximum CPU Frequency | 120 MHz | — |
| Instruction Cache | 2 KB | 2 KB |
| Flash Memory | 1 MB (1024 KB) | — |
| SRAM | 160 KB | 160 KB |
| ROM (Bootloader + IAP) | 16 KB | — |
| Operating Voltage | 1.8 V to 3.6 V | — |
| पैकेज | 100-pin TFBGA (9x9 mm) | 100-pin LQFP (14x14 mm) |
| Temperature Range | Industrial -40C to +85C | — |
| GPIO Count | [DATA_NEEDED: GPIO count from datasheet pin list] | — |
| ADC | 10/12-bit, multi-channel | 12-bit, up to 24 channels (per datasheet family) |
| USB | USB 2.0 Full-Speed Device/Host | — |
| Ethernet | EMAC (external PHY required) | — |
| CAN | Yes (1 controller) | — |
| UART/USART | Up to 10 | — |
| SPI | Yes (multiple controllers) | — |
| TWI (I2C) | Yes (multiple controllers) | — |
| Timers/PWM | 16-bit, multi-channel | — |
| DMA | Multi-channel DMA controller | — |
| Memory Protection Unit | Yes | — |
| माउंटिंग प्रकार | Surface Mount (BGA) | Surface Mount (Tape & Reel) |
| MSL स्तर | [DATA_NEEDED: MSL level] | MSL3 (per LQFP moisture classification) |
| RoHS स्थिति | Compliant | Compliant |
| Pin-to-Pin Compatibility | SAM3N, SAM3S, SAM4N, SAM7S (64/100-pin variants) | — |
| CPU Frequency | — | 120 MHz maximum |
| Program Memory (Flash) | — | 1 MB (2 x 512 KB dual-bank) |
| MPU (Memory Protection Unit) | — | Yes |
| सप्लाई वोल्टेज | — | 1.62 V to 3.6 V |
| ऑपरेटिंग तापमान | — | -40 C to +85 C (industrial) |
| USB Interface | — | USB 2.0 Full-Speed with on-chip transceiver |
| Timers | — | Multiple 16/32-bit timer/counter channels with PWM |
| Communication Interfaces | — | 5x USART, 2x UART, 2x TWI (I2C), 2x SPI, 1x HS-SPI |
| Recommended Die Revision for New Designs | — | Revision B (use ATSAM4SD16CB-AUR / -CFUR variants) |