ATSAM4SD16CA-CU vs ATSAM4SD16CA-CUR तुलना
विस्तृत दोनों ओर की तुलना ATSAM4SD16CA-CU द्वारा Microchip Technology और ATSAM4SD16CA-CUR द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4SD16CA-CU - 120MHz Cortex-M4 MCU, 1MB Flash | Microchip
ATSAM4SD16CA-CU ✓ सक्रियMicrochip Technology
ATSAM4SD16CA-CUR - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4SD16CA-CUR ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4SD16CA-CU | ATSAM4SD16CA-CUR |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M4 | — |
| Core Architecture | ARMv7E-M (Thumb-2 + DSP) | ARM Cortex-M4 with FPU |
| Maximum CPU Frequency | 120 MHz | — |
| Instruction Cache | 2 KB | — |
| Flash Memory | 1 MB (1024 KB) | — |
| SRAM | 160 KB | 160 KB |
| ROM (Bootloader + IAP) | 16 KB | — |
| Operating Voltage | 1.8 V to 3.6 V | — |
| पैकेज | 100-pin TFBGA (9x9 mm) | 100-TFBGA (9 x 9 mm) |
| Temperature Range | Industrial -40C to +85C | — |
| GPIO Count | [DATA_NEEDED: GPIO count from datasheet pin list] | — |
| ADC | 10/12-bit, multi-channel | 12-bit, up to 24 channels |
| USB | USB 2.0 Full-Speed Device/Host | — |
| Ethernet | EMAC (external PHY required) | — |
| CAN | Yes (1 controller) | — |
| UART/USART | Up to 10 | — |
| SPI | Yes (multiple controllers) | — |
| TWI (I2C) | Yes (multiple controllers) | — |
| Timers/PWM | 16-bit, multi-channel | — |
| DMA | Multi-channel DMA controller | Peripheral DMA Controller (PDC) |
| Memory Protection Unit | Yes | — |
| माउंटिंग प्रकार | Surface Mount (BGA) | Surface Mount (BGA) |
| MSL स्तर | [DATA_NEEDED: MSL level] | MSL3 (per JEDEC J-STD-020) |
| RoHS स्थिति | Compliant | Compliant |
| Pin-to-Pin Compatibility | SAM3N, SAM3S, SAM4N, SAM7S (64/100-pin variants) | — |
| Core Bit Width | — | 32-bit |
| Maximum CPU Clock | — | 120 MHz |
| Program Memory (Flash) | — | 1 MB (2 x 512 KB dual-bank) |
| Supply Voltage (VDD) | — | 1.62 V to 3.6 V |
| I/O Voltage | — | 1.62 V to 3.6 V |
| ऑपरेटिंग तापमान | — | -40 °C to +85 °C (Industrial) |
| Communication Interfaces | — | USB 2.0 Full-Speed, 2 x CAN, USART/UART, SPI, TWI (I²C), HSMCI |
| PWM / Timer | — | 16-bit, multi-channel |
| Trace | — | Embedded Trace Macrocell (ETM) + SWD |