ATSAM4SD16CB-ANR vs ATSAM4S-XPLD तुलना
विस्तृत दोनों ओर की तुलना ATSAM4SD16CB-ANR द्वारा Microchip Technology और ATSAM4S-XPLD द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4SD16CB-ANR - 32-bit ARM Cortex-M4 MCU, 1MB Flash, 100-LQFP | Microchip
ATSAM4SD16CB-ANR ✓ सक्रियMicrochip Technology
ATSAM4S-XPLD - SAM4S Xplained ARM Cortex-M4 MCU Eval Kit | Microchip
ATSAM4S-XPLD Obsoleteविशेषता तुलना
| पैरामीटर | ATSAM4SD16CB-ANR | ATSAM4S-XPLD |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Core Architecture | ARM Cortex-M4F (32-bit RISC, with FPU) | 32-bit RISC with FPU and DSP instructions |
| Maximum CPU Clock | 120 MHz | 120 MHz |
| Flash Memory | 1 MB (2 x 512 KB dual-bank) | — |
| SRAM | 160 KB | — |
| Operating Voltage | 1.62 V to 3.6 V | — |
| पैकेज | 100-LQFP (14 x 14 mm) | — |
| ऑपरेटिंग तापमान | -40C to +105C (extended) | — |
| USB Interface | USB 2.0 Full-Speed Device, embedded transceiver | — |
| External Bus Interface (EBI) | Yes - SRAM/NOR/PSRAM | — |
| ADC | 8-channel, 10-bit | — |
| Timers | 2 x 3-channel 16-bit TC | — |
| Communication | 4 x USART, 2 x UART, 2 x SPI, 1 x HS-SPI, 2 x TWI (I2C), 2 x I2S | — |
| SD/MMC Interface | Yes (HSMCI) | — |
| Cryptography | TRNG + AES hardware accelerator | — |
| Silicon Revision | MRL B (Revision B) | — |
| माउंटिंग प्रकार | Surface Mount | — |
| RoHS स्थिति | Compliant | Compliant |
| Packaging | Tape & Reel | Box |
| Device Core | — | ARM Cortex-M4 |
| On-board MCU | — | ATSAM4S16C |
| Embedded Flash (on MCU) | — | 1 Mbyte |
| Embedded SRAM (on MCU) | — | 128 Kbytes |
| External SRAM | — | IS66WV51216DALL, 8 Mbit (512 K x 16) |
| Main Crystal Oscillator | — | 12 MHz |
| Low-Frequency Crystal | — | 32.768 kHz |
| USB Device Interface | — | Micro-AB USB (USB 2.0 Full-Speed device) |
| Debug Interface | — | Micro-AB USB EDBG (SEGGER J-Link OB, Virtual COM Port) |
| User LEDs | — | 4 |
| User Pushbuttons | — | 1 (plus 1 reset button) |
| Capacitive Touch | — | 4 Atmel QTouch buttons |
| Expansion Headers | — | Xplained dual-row headers (analog + digital) |
| External Power Input | — | External voltage input (header) |
| Product Type | — | 32-Bit MCU 32-Bit Embedded Evaluation Board |
| Series | — | AT91SAM4 (SAM4S Xplained) |