ATSAMA5D3-XPLD vs ATSAMA5D2-XULT तुलना
विस्तृत दोनों ओर की तुलना ATSAMA5D3-XPLD द्वारा Microchip Technology और ATSAMA5D2-XULT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMA5D3-XPLD - SAMA5D3 Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D3-XPLD ⚠ अंतिम खरीदMicrochip Technology
ATSAMA5D2-XULT - SAMA5D2 Xplained Ultra Cortex-A5 MPU Eval Kit | Microchip
ATSAMA5D2-XULT Obsoleteविशेषता तुलना
| पैरामीटर | ATSAMA5D3-XPLD | ATSAMA5D2-XULT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | अंतिम बार खरीदें | Obsolete |
| Product Type | Embedded Evaluation Board (Xplained Kit) | — |
| Target MPU | ATSAMA5D36 (ARM Cortex-A5) | — |
| Core | ARM Cortex-A5 with FPU | — |
| Maximum CPU Clock | 536 MHz | 500 MHz |
| On-chip SRAM | 128 KB | — |
| Cache (I/D) | 32 KB each | — |
| External Memory Interface | DDR2 / LPDDR / LPDDR2 + NAND Flash + QSPI | — |
| Graphics Output | HDMI + parallel LCD | — |
| Ethernet | 2x 10/100/1000 GMAC | — |
| USB | 1x USB 2.0 Device, 2x USB 2.0 Host | — |
| CAN | 2x CAN 2.0B | — |
| Storage | microSD slot + NAND Flash on-board | — |
| Expansion Headers | Arduino R3 + Xplained extension header | — |
| Debug Interface | On-board J-Link-OB (JTAG + SWD) + serial console | On-board debugger + JTAG/SWD |
| Operating System Support | Linux Mainline, Yocto Project, bare-metal C examples | — |
| Included Accessories | micro-AB to Type-A USB cable | — |
| ऑपरेटिंग तापमान | 0C to +70C (commercial evaluation use) | — |
| Compliance | RoHS Compliant | — |
| Manufacturer | — | Microchip Technology (formerly Atmel) |
| Series | — | AT91SAMA5 / SAMA5D2 Xplained Ultra |
| Board Type | — | Embedded Evaluation Board / MPU Evaluation Kit |
| On-board MPU | — | SAMA5D27 ARM Cortex-A5 |
| Core Architecture | — | ARM Cortex-A5 with NEON SIMD engine |
| On-board RAM | — | 128 MB DDR3 SDRAM |
| On-board Storage | — | 4 GB eMMC Flash |
| Connectivity | — | Gigabit Ethernet, USB Device/Host, mikroBUS, Xplained Extension Headers |
| Display Interface | — | LCD connector (RGB / LVDS) |
| Audio | — | Audio codec + Class-D amplifier interface |
| Image Sensor Interface | — | Yes (parallel image sensor connector) |
| Software Support | — | MPLAB Harmony 3, Linux (linux4sam / Buildroot) |
| Packaging | — | Boxed kit (board + accessories) |
| Product Status | — | Obsolete (per Octopart listing) |
| RoHS स्थिति | — | Compliant |