ATSAMA5D3-XPLD vs ATSAMA5D2B-XULT तुलना
विस्तृत दोनों ओर की तुलना ATSAMA5D3-XPLD द्वारा Microchip Technology और ATSAMA5D2B-XULT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMA5D3-XPLD - SAMA5D3 Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D3-XPLD ⚠ अंतिम खरीदMicrochip Technology
ATSAMA5D2B-XULT - SAMA5D2 Xplained Ultra Kit | Microchip
ATSAMA5D2B-XULT Obsoleteविशेषता तुलना
| पैरामीटर | ATSAMA5D3-XPLD | ATSAMA5D2B-XULT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | अंतिम बार खरीदें | Obsolete |
| Product Type | Embedded Evaluation Board (Xplained Kit) | Embedded MPU Evaluation Board / Xplained Ultra Kit |
| Target MPU | ATSAMA5D36 (ARM Cortex-A5) | — |
| Core | ARM Cortex-A5 with FPU | — |
| Maximum CPU Clock | 536 MHz | — |
| On-chip SRAM | 128 KB | — |
| Cache (I/D) | 32 KB each | — |
| External Memory Interface | DDR2 / LPDDR / LPDDR2 + NAND Flash + QSPI | — |
| Graphics Output | HDMI + parallel LCD | — |
| Ethernet | 2x 10/100/1000 GMAC | 10/100 Mbps with on-board PHY |
| USB | 1x USB 2.0 Device, 2x USB 2.0 Host | — |
| CAN | 2x CAN 2.0B | — |
| Storage | microSD slot + NAND Flash on-board | — |
| Expansion Headers | Arduino R3 + Xplained extension header | — |
| Debug Interface | On-board J-Link-OB (JTAG + SWD) + serial console | — |
| Operating System Support | Linux Mainline, Yocto Project, bare-metal C examples | — |
| Included Accessories | micro-AB to Type-A USB cable | — |
| ऑपरेटिंग तापमान | 0C to +70C (commercial evaluation use) | — |
| Compliance | RoHS Compliant | — |
| Featured MPU | — | ATSAMA5D27B (SAMA5D2 family, ARM Cortex-A5) |
| MPU Core | — | ARM Cortex-A5, 32-bit, single-core |
| MPU Clock Speed | — | Up to 500 MHz |
| MPU Package (SiP) | — | 289-ball BGA |
| On-Package Memory | — | 128 MB DDR2 |
| External Flash | — | QSPI NOR flash (on-board) |
| USB Interfaces | — | USB 2.0 host + USB 2.0 device |
| SD/MMC | — | microSD socket + 4-bit SD/MMC interface |
| CAN Interfaces | — | 2 x CAN-FD |
| Expansion | — | Arduino R3, Xplained Pro, mikroBUS |
| Display | — | 24-bit TFT LCD connector |
| Pre-flashed OS | — | Linux demonstration image |
| RoHS स्थिति | — | Compliant |