ATSAMC20J18A-AUT vs ATSAMC21J18A-ANT तुलना
विस्तृत दोनों ओर की तुलना ATSAMC20J18A-AUT द्वारा Microchip Technology और ATSAMC21J18A-ANT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMC20J18A-AUT - 256KB Flash Cortex-M0+ MCU | Microchip
ATSAMC20J18A-AUT ✓ सक्रियMicrochip Technology
ATSAMC21J18A-ANT - 32-bit ARM Cortex-M0+ MCU 48MHz CAN-FD | Microchip
ATSAMC21J18A-ANT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMC20J18A-AUT | ATSAMC21J18A-ANT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M0+ (32-bit, single-core) | — |
| Maximum Clock Speed | 48 MHz | — |
| Program Memory (Flash) | 256 KB (256K x 8) | — |
| SRAM | 32 KB | 32 KB |
| Operating Voltage Range | 2.7 V to 5.5 V | — |
| I/O Tolerance | 5 V tolerant | — |
| GPIO Count | 52 (on 64-pin TQFP) | — |
| ADC | 12-bit, up to 1 Msps | — |
| Analog Comparators | 2 | — |
| PTC (Touch Channels) | Up to 24 | — |
| CAN | CAN-FD controller | — |
| USB | Full-Speed USB Device | — |
| SERCOM | Up to 6 configurable serial interfaces | — |
| पैकेज | 64-pin TQFP (10x10 mm) | 64-pin TQFP, 10x10 mm |
| Operating Temperature (Industrial) | -40 C to +85 C | — |
| Operating Temperature (Automotive) | -40 C to +125 C (AEC-Q100 grades available in family) | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount, Tape & Reel (-ANT) |
| MSL स्तर | 3 | — |
| RoHS स्थिति | Compliant (Green) | Compliant |
| Core Architecture | — | ARM Cortex-M0+ (32-bit, single-core) |
| Family / Series | — | SAM C21, Functional Safety (FuSa) |
| Maximum CPU Clock | — | 48 MHz |
| Flash Memory | — | 256 KB (in-system self-programmable) |
| EEPROM Emulation Area | — | 8 KB independent self-programmable Flash block |
| सप्लाई वोल्टेज | — | 2.7 V to 5.5 V (5 V-tolerant I/O) |
| ऑपरेटिंग तापमान | — | -40 C to +105 C |
| Communication Peripherals | — | CAN-FD, USB 2.0 FS device, 6x SERCOM (UART/SPI/I2C) |
| Analog | — | 12-bit ADC (up to 16 channels), 2x analog comparators, PTC |
| Hardware Multiplier | — | Single-cycle (32-bit result) |
| Memory Protection Unit (MPU) | — | Yes |
| Debug Interface | — | SWD + Micro Trace Buffer |
| I/O Pins (approximate) | — | [DATA_NEEDED: exact GPIO count for 64-TQFP] |