ATSAMC21-XPRO vs ATSAME54-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAMC21-XPRO द्वारा Microchip Technology और ATSAME54-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMC21-XPRO - SAM C21 Xplained Pro Evaluation Kit | Microchip
ATSAMC21-XPRO ✓ सक्रियMicrochip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMC21-XPRO | ATSAME54-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Evaluation / Development Board | Evaluation Kit / Development Board |
| Target MCU | ATSAMC21J18A | ATSAME54P20A |
| Core Processor | ARM Cortex-M0+ 32-bit | ARM Cortex-M4F (with FPU and DSP extensions) |
| Core Architecture | ARMv6-M | 32-bit RISC |
| Operating Frequency | [DATA_NEEDED: max MHz] | — |
| On-board Flash (target MCU) | 256 KB | — |
| On-board SRAM (target MCU) | 32 KB | — |
| Supply Voltage (board) | 5V via USB or external | — |
| Digital I/O Voltage | 5V tolerant | — |
| On-board Debugger | EDBG (CMSIS-DAP / DGI / CDC) | — |
| Debug Interface | USB (micro-B) to host PC | — |
| Extension Headers | 3x Xplained Pro (EXT1, EXT2, EXT3) | 2x Xplained Pro extension headers, mikroBUS socket |
| Current Measurement Header | 1x2 100 mil, marked MCU current | — |
| Buttons | Reset + 2x QTouch | — |
| LEDs | Power LED + Status LED + User LED | — |
| On-board MCU Package | 64-pin TQFP / VQFN-style | — |
| RoHS स्थिति | Compliant | Compliant |
| ऑपरेटिंग तापमान | 0C to +70C (commercial dev kit) | — |
| Maximum Clock Speed | — | 120 MHz |
| Flash Memory | — | 1 MB dual-panel Flash with ECC (on target MCU) |
| SRAM | — | 256 KB with ECC (on target MCU) |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |