ATSAMC21J18A-ANT vs ATSAMC21J15A-ANT तुलना
विस्तृत दोनों ओर की तुलना ATSAMC21J18A-ANT द्वारा Microchip Technology और ATSAMC21J15A-ANT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMC21J18A-ANT - 32-bit ARM Cortex-M0+ MCU 48MHz CAN-FD | Microchip
ATSAMC21J18A-ANT ✓ सक्रियMicrochip Technology
ATSAMC21J15A-ANT - 5V Cortex-M0+ MCU 32KB Flash 64-TQFP
ATSAMC21J15A-ANT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMC21J18A-ANT | ATSAMC21J15A-ANT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M0+ (32-bit, single-core) | — |
| Family / Series | SAM C21, Functional Safety (FuSa) | — |
| Maximum CPU Clock | 48 MHz | — |
| Flash Memory | 256 KB (in-system self-programmable) | 32 KB (in-system self-programmable) |
| SRAM | 32 KB | 4 KB |
| EEPROM Emulation Area | 8 KB independent self-programmable Flash block | — |
| सप्लाई वोल्टेज | 2.7 V to 5.5 V (5 V-tolerant I/O) | — |
| ऑपरेटिंग तापमान | -40 C to +105 C | — |
| पैकेज | 64-pin TQFP, 10x10 mm | 64-pin TQFP (10x10 mm) |
| माउंटिंग प्रकार | Surface Mount, Tape & Reel (-ANT) | Surface Mount |
| Communication Peripherals | CAN-FD, USB 2.0 FS device, 6x SERCOM (UART/SPI/I2C) | — |
| Analog | 12-bit ADC (up to 16 channels), 2x analog comparators, PTC | — |
| Hardware Multiplier | Single-cycle (32-bit result) | — |
| Memory Protection Unit (MPU) | Yes | Yes |
| Debug Interface | SWD + Micro Trace Buffer | — |
| I/O Pins (approximate) | [DATA_NEEDED: exact GPIO count for 64-TQFP] | — |
| RoHS स्थिति | Compliant | Compliant (Green) |
| Core | — | ARM Cortex-M0+ (32-bit) |
| Maximum CPU Frequency | — | 48 MHz |
| Additional Flash (EEPROM emulation) | — | 1 KB independent self-programmable |
| Supply Voltage Range | — | 2.7 V to 5.5 V |
| ऑपरेटिंग तापमान रेंज | — | -40C to +105C |
| Programmable I/O Pins | — | Up to 52 |
| DAC | — | 1x 10-bit, 350 ksps |
| Analog Comparators | — | 4 with window-compare function |
| Peripheral Touch Controller (PTC) | — | 256-channel capacitive touch / proximity sensing |
| CAN-FD | — | Yes (ISO 11898-1:2015, up to 8 Mbps) |
| SERCOM Modules | — | Up to 6 configurable serial interfaces |
| Micro Trace Buffer | — | Yes |