ATSAMD20E14B-AU vs ATSAMD20E15A-AUT तुलना
विस्तृत दोनों ओर की तुलना ATSAMD20E14B-AU द्वारा Microchip Technology और ATSAMD20E15A-AUT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMD20E14B-AU - 48MHz ARM Cortex-M0+ MCU, 16KB Flash | Microchip
ATSAMD20E14B-AU ✓ सक्रियMicrochip Technology
ATSAMD20E15A-AUT - Cortex-M0+ 48MHz 32KB Flash MCU | Microchip
ATSAMD20E15A-AUT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMD20E14B-AU | ATSAMD20E15A-AUT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M0+ (32-bit) | — |
| Family | SAM D20E | — |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| Program Memory (Flash) | 16 KB (16K x 8) | — |
| SRAM | 2 KB | 4 KB |
| Supply Voltage (VDD) | 1.62 V to 3.63 V | — |
| ऑपरेटिंग तापमान | -40 C to +85 C (Industrial) | -40 C to +85 C (industrial) |
| पैकेज | 32-pin TQFP (7x7 mm) | 32-pin TQFP (7x7 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ADC | 12-bit, up to 350 ksps | 12-bit, up to [DATA_NEEDED: channel count] |
| DAC | 10-bit, 350 ksps | 10-bit, 1 channel |
| Communication Interfaces | 6x SERCOM (UART/SPI/I2C), USB 2.0 Full-Speed Device | — |
| Timers/Counters | TC x3, TCC x2, RTC x1, WDT | Multiple 16-bit TC, 1 RTC |
| Touch Channels (PTC) | Supported (Peripheral Touch Controller) | — |
| DMA Channels | 4 | [DATA_NEEDED: DMA channel count] |
| GPIO | Up to 26 I/O | — |
| Debug Interface | SWD (Serial Wire Debug) | — |
| RoHS स्थिति | Compliant | Compliant (per Microchip product page) |
| Core | — | ARM Cortex-M0+ (32-bit) |
| Program Flash | — | 32 KB |
| Operating Voltage (VDD) | — | 1.62 V to 3.63 V |
| GPIO Count | — | [DATA_NEEDED: GPIO count from datasheet pinout] |
| Serial Interfaces (SERCOM) | — | Up to 6 configurable (UART/SPI/I2C) |
| Low-Power Modes | — | Sleep, Idle, Standby, Backup |
| Programming/Debug | — | SWD (Serial Wire Debug) |
| MSL स्तर | — | [DATA_NEEDED: MSL rating] |