ATSAMD21-XPRO vs ATSAMD20-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAMD21-XPRO द्वारा Microchip Technology और ATSAMD20-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMD21-XPRO - SAM D21 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMD21-XPRO ✓ सक्रियMicrochip Technology
ATSAMD20-XPRO - SAM D20 Xplained Pro Cortex-M0+ Eval Kit | Microchip
ATSAMD20-XPRO ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMD21-XPRO | ATSAMD20-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Evaluation Board (Xplained Pro) | — |
| Target MCU | ATSAMD21J18A | ATSAMD20J18A |
| Core Processor | ARM Cortex-M0+ 32-bit | — |
| CPU Max Frequency | 48 MHz | — |
| Flash Memory (on-chip) | 256 KB | — |
| SRAM | 32 KB | 32 KiB |
| On-board SPI Flash | 1 MB | — |
| Low-frequency Crystal | 32.768 kHz | — |
| High-frequency Crystal | 12 MHz | — |
| Debug Interface | nEDBG (CMSIS-DAP) on-board | Embedded Atmel EDBG (USB HID) |
| USB Connectors | 1x Micro-B (debug/CDC), 1x Micro-B (target) | — |
| Extension Headers | 3x 20-pin Xplained Pro (compatible with I/O1, OLED1, QT1, PROTO1) | 3 x Xplained Pro 20-pin |
| User Inputs | 1x mechanical reset button, 1x user touch button | — |
| User Outputs | 1x user LED | — |
| Arduino-compatible Headers | Yes (subset of ATSAMD21J18A I/O) | — |
| Operating Voltage (target) | 3.3 V | — |
| Board Power Source | USB Micro-B | — |
| Supported IDEs | MPLAB X IDE, Atmel Studio 7, Atmel START | — |
| RoHS स्थिति | Compliant | Compliant |
| Form Factor | Xplained Pro standard (approx 88 mm x 53 mm) | — |
| Manufacturer | — | Microchip Technology |
| Series | — | SAM D20 Xplained Pro |
| Core | — | ARM Cortex-M0+ 32-bit |
| Clock Speed | — | 48 MHz |
| Flash Memory | — | 256 KiB |
| Crystal Oscillator | — | 32.768 kHz |
| Arduino Shield Compatibility | — | Yes, R3 footprint |
| Power Input | — | USB micro-B 5 V |
| Board Form Factor | — | Xplained Pro (approx. 75 x 100 mm) |
| Toolchain Support | — | Microchip Studio / Atmel Studio / MPLAB X IDE / ASF |
| Lead-Free | — | Yes |
| ऑपरेटिंग तापमान | — | 0C to +60C (commercial eval kit) |