ATSAMD21-XPRO vs ATSAMDA1-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAMD21-XPRO द्वारा Microchip Technology और ATSAMDA1-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMD21-XPRO - SAM D21 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMD21-XPRO ✓ सक्रियMicrochip Technology
ATSAMDA1-XPRO - SAM DA1 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMDA1-XPRO ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMD21-XPRO | ATSAMDA1-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Evaluation Board (Xplained Pro) | Evaluation Board / Development Kit |
| Target MCU | ATSAMD21J18A | — |
| Core Processor | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit |
| CPU Max Frequency | 48 MHz | — |
| Flash Memory (on-chip) | 256 KB | — |
| SRAM | 32 KB | — |
| On-board SPI Flash | 1 MB | — |
| Low-frequency Crystal | 32.768 kHz | — |
| High-frequency Crystal | 12 MHz | — |
| Debug Interface | nEDBG (CMSIS-DAP) on-board | — |
| USB Connectors | 1x Micro-B (debug/CDC), 1x Micro-B (target) | — |
| Extension Headers | 3x 20-pin Xplained Pro (compatible with I/O1, OLED1, QT1, PROTO1) | — |
| User Inputs | 1x mechanical reset button, 1x user touch button | — |
| User Outputs | 1x user LED | — |
| Arduino-compatible Headers | Yes (subset of ATSAMD21J18A I/O) | — |
| Operating Voltage (target) | 3.3 V | — |
| Board Power Source | USB Micro-B | — |
| Supported IDEs | MPLAB X IDE, Atmel Studio 7, Atmel START | — |
| RoHS स्थिति | Compliant | Compliant |
| Form Factor | Xplained Pro standard (approx 88 mm x 53 mm) | — |
| Target MCU Family | — | SAM DA1 (ARM Cortex-M0+) |
| Target Device Variants | — | ATSAMDA1E / ATSAMDA1G / ATSAMDA1J (32-/48-/64-pin) |
| Maximum Core Frequency | — | 48 MHz |
| CoreMark/MHz | — | 2.46 |
| On-chip Flash (max) | — | 64 KB |
| On-chip SRAM | — | 8 KB |
| Read-While-Write Flash | — | Up to 2 KB |
| SERCOM Modules | — | 6 |
| Peripheral Touch Controller (PTC) | — | Yes (hardware capacitive touch) |
| Integrated Debugger | — | Yes (EDBG / Xplained Pro on-board) |
| Expansion Interface | — | Xplained Pro / mikroBUS headers |
| Operating Temperature (target MCU) | — | -40 C to +105 C |
| Automotive Qualification (target MCU) | — | AEC-Q100 qualified |