ATSAMD21G16B-MF vs ATSAMD21G16B-MFT तुलना
विस्तृत दोनों ओर की तुलना ATSAMD21G16B-MF द्वारा Microchip Technology और ATSAMD21G16B-MFT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMD21G16B-MF - 64KB Flash Cortex-M0+ MCU 48QFN | Microchip
ATSAMD21G16B-MF ✓ सक्रियMicrochip Technology
ATSAMD21G16B-MFT - 48MHz ARM Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD21G16B-MFT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMD21G16B-MF | ATSAMD21G16B-MFT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M0+ (32-bit) | — |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| CoreMark/MHz | 2.46 | — |
| Flash Memory | 64 KB | — |
| SRAM | 8 KB | 8 KB |
| Operating Voltage | 1.62 V to 3.63 V (3.3 V typical) | — |
| ऑपरेटिंग तापमान | -40C to +125C (industrial) | -40 C to +125 C (industrial) |
| पैकेज | 48-pin QFN | 48-QFN (7x7 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| USB | USB 2.0 Full-Speed Device | USB 2.0 Full-Speed Device, on-chip transceiver |
| ADC | 12-bit, up to 350 ksps | 12-bit, up to 350 ksps |
| SERCOM Channels | Up to 6 (configurable UART/SPI/I2C) | — |
| Timers | 24-bit TC, RTC, SysTick | — |
| GPIOs | [DATA_NEEDED: GPIO count for 48QFN variant] | — |
| RoHS स्थिति | Compliant | Green, RoHS compliant |
| हैलोजन फ्री | Yes (Microchip green compound) | — |
| Core Architecture | — | ARM Cortex-M0+ (32-bit) |
| CoreMark Performance | — | 2.46 CoreMark/MHz |
| Program Flash | — | 64 KB (in-system self-programmable) |
| Supply Voltage (VDDIN) | — | 1.62 V to 3.63 V |
| Packaging Type | — | Tape & Reel (MFT suffix) |
| GPIO Count | — | Up to 38 pins |
| DAC | — | 10-bit |
| Analog Comparators | — | 2 |
| SERCOM Modules | — | 6 (configurable UART/SPI/I2C) |
| DMA Channels | — | 12 |
| Peripheral Touch Controller (PTC) | — | Yes (capacitive touch sensing) |
| Debug Interface | — | 2-pin Serial Wire Debug (SWD) |
| Functional Safety (FuSa) | — | IEC 60730 class B capable |
| Hardware Multiplier | — | Single-cycle |