ATSAMD21J17D-MU vs ATSAMD21J15B-MUT तुलना
विस्तृत दोनों ओर की तुलना ATSAMD21J17D-MU द्वारा Microchip Technology और ATSAMD21J15B-MUT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMD21J17D-MU - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip
ATSAMD21J17D-MU ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMD21J17D-MU | ATSAMD21J15B-MUT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M0+ (SAM D21J family) | — |
| CPU Bit Width | 32-bit | — |
| Maximum CPU Clock | 48 MHz | — |
| Program Memory (Flash) | 128 KB (128K x 8) | — |
| SRAM | 16 KB | 4 KB |
| RWW Flash Section | 4 KB | — |
| Supply Voltage (Vdd) | 1.62 V to 3.63 V | — |
| ऑपरेटिंग तापमान | -40C to +85C (Industrial) | -40 C to +85 C (Industrial) |
| USB | USB 2.0 Full-Speed Device with on-chip transceiver | Full-speed USB 2.0 with on-chip transceiver |
| ADC | 12-bit, up to 350 ksps | 12-bit, up to 14 channels |
| DAC | 10-bit, 350 ksps | 10-bit, 1 channel |
| SERCOM Modules | 6 (configurable as UART/SPI/I2C) | — |
| Timers/Counters | 6 x 16-bit TC, plus 32-bit RTC | TC (3x 16-bit), TCC (1x 24-bit) |
| PTC (Touch) | Peripheral Touch Controller supported | — |
| I/O Pins | 52 programmable GPIO | — |
| पैकेज | 64-QFN (9x9 mm) with Exposed Pad | 64-QFN (9x9 mm) with EP |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | 3 (168 hours) | 3 (168 hours) |
| RoHS स्थिति | Compliant | Compliant |
| Lead-Free / Halogen-Free | Yes / Yes | — |
| Core Architecture | — | ARM Cortex-M0+ (32-bit) |
| Family | — | SAM D21J (Functional Safety - FuSa) |
| Maximum CPU Frequency | — | 48 MHz |
| CoreMark/MHz | — | 2.46 |
| Program Flash | — | 32 KB |
| सप्लाई वोल्टेज | — | 1.62 V to 3.63 V |
| SERCOM | — | 6 channels (UART/SPI/I2C configurable) |
| RTC | — | Yes, with 32 kHz crystal support |
| Debug Interface | — | Serial Wire Debug (SWD), 2-pin |