ATSAMD21J18A-MUT vs ATSAML22J17A-MUT तुलना
विस्तृत दोनों ओर की तुलना ATSAMD21J18A-MUT द्वारा Microchip Technology और ATSAML22J17A-MUT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMD21J18A-MUT - 48MHz ARM Cortex-M0+ 256KB Flash MCU | Microchip
ATSAMD21J18A-MUT ✓ सक्रियMicrochip Technology
ATSAML22J17A-MUT - ARM Cortex-M0+ MCU 128KB Flash 64-QFN | Microchip
ATSAML22J17A-MUT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMD21J18A-MUT | ATSAML22J17A-MUT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M0+ (32-bit) | — |
| Maximum Clock Speed | 48 MHz | — |
| Flash Memory | 256 KB (256K x 8) | — |
| SRAM | 32 KB | — |
| Operating Voltage Range | 1.62 V to 3.63 V | — |
| पैकेज | 64-pin QFN (9x9 mm) | — |
| USB | USB 2.0 Full-Speed with on-chip transceiver | — |
| SERCOM Modules | 6 (configurable as UART/SPI/I2C) | — |
| ADC | 12-bit, up to 20 channels, 350 ksps | — |
| DAC | 10-bit, 1 channel | — |
| Analog Comparators | 2 | — |
| Event System | 6 channels | — |
| Sleep Modes | IDLE, STANDBY, BACKUP, OFF | — |
| ऑपरेटिंग तापमान | -40C to +85C (industrial) | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount, Tape & Reel |
| RoHS स्थिति | Compliant | Compliant |
| Functional Safety | FuSa (SAM D21J family) | — |
| Core Processor | — | ARM Cortex-M0+ |
| Core Size | — | 32-Bit |
| Maximum CPU Frequency | — | 32 MHz |
| Program Memory Type | — | Flash |
| Program Memory Size | — | 128 KB (128K x 8) |
| EEPROM Size | — | 8 KB (RWWEE) |
| RAM Size | — | [DATA_NEEDED: RAM size] |
| Supply Voltage Range | — | 1.6 V to 3.6 V |
| Active Current Consumption | — | 39 uA/MHz (CoreMark) |
| Ultra-Low-Power Backup Mode | — | 490 nA (RTC running) |
| ऑपरेटिंग तापमान रेंज | — | -40C to +85C |
| पैकेज / केस | — | 64-QFN (9x9 mm) with exposed pad |
| Number of I/O Pins | — | [DATA_NEEDED: I/O count] |
| Connectivity | — | I2C, SPI, UART, USB 2.0 Full-Speed Device |
| Peripherals | — | SLCD controller, 12-bit ADC, RTC, multiple SERCOM |
| Green Compliance | — | Yes (lead-free, halogen-free per datasheet suffix MUT) |