ATSAMD51J18A-AU-EFP vs ATSAMD51G19A-MFT तुलना
विस्तृत दोनों ओर की तुलना ATSAMD51J18A-AU-EFP द्वारा Microchip Technology और ATSAMD51G19A-MFT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMD51J18A-AU-EFP - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAMD51J18A-AU-EFP ✓ सक्रियMicrochip Technology
ATSAMD51G19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51G19A-MFT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMD51J18A-AU-EFP | ATSAMD51G19A-MFT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M4F with FPU and DSP | ARM Cortex-M4F with FPU and DSP instructions |
| Maximum CPU Speed | 120 MHz | — |
| Program Flash | 256 KB (256K x 8) with ECC | — |
| SRAM | 128 KB with ECC | 192 KB (with ECC) |
| पैकेज | 64-TQFP (10x10 mm) | 48-pin VQFN (7x7 mm) |
| Operating Voltage | 1.71 V to 3.63 V | — |
| ऑपरेटिंग तापमान | -40C to +85C | -40C to +125C (extended industrial) |
| ADC | 12-bit, up to 1 Msps, up to 16 channels | 12-bit, up to 1 Msps, up to 16 channels |
| DAC | 10-bit, 350 ksps, 2 channels | 10-bit, 300 ksps |
| USB | USB 2.0 Full-Speed with on-chip PHY | USB 2.0 Full-Speed device and host (integrated PHY) |
| Configurable SERCOM | 6 (UART/SPI/I2C/LIN) | — |
| I2S | Yes | — |
| Timers (TC/TCC) | Yes (multiple 16-bit) | — |
| DMA Channels | DMAC, multiple channels | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | 3 (168 hours) | 3 (168 hours) |
| RoHS स्थिति | Compliant | Compliant |
| Lead-Free | Yes | — |
| Maximum CPU Clock | — | 120 MHz |
| Flash Memory | — | 512 KB (dual-panel with ECC) |
| Operating Voltage (VDDIO) | — | 1.71 V to 3.63 V |
| SERCOM Modules | — | 6 (each configurable as UART/SPI/I2C) |
| Timers | — | 16-bit TC, 32-bit TCC |
| CAN | — | CAN-FD controller |
| External Bus Interface | — | QSPI / SERCOM-based |