ATSAMDA1-XPRO vs ATSAMA5D2C-XULT तुलना
विस्तृत दोनों ओर की तुलना ATSAMDA1-XPRO द्वारा Microchip Technology और ATSAMA5D2C-XULT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMDA1-XPRO - SAM DA1 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMDA1-XPRO ✓ सक्रियMicrochip Technology
ATSAMA5D2C-XULT - SAMA5D2 Xplained Ultra ARM Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D2C-XULT Obsoleteविशेषता तुलना
| पैरामीटर | ATSAMDA1-XPRO | ATSAMA5D2C-XULT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Product Type | Evaluation Board / Development Kit | Embedded MPU Evaluation Board |
| Target MCU Family | SAM DA1 (ARM Cortex-M0+) | — |
| Target Device Variants | ATSAMDA1E / ATSAMDA1G / ATSAMDA1J (32-/48-/64-pin) | — |
| Core Processor | ARM Cortex-M0+ 32-bit | ARM Cortex-A5 (SAMA5D2) |
| Maximum Core Frequency | 48 MHz | — |
| CoreMark/MHz | 2.46 | — |
| On-chip Flash (max) | 64 KB | — |
| On-chip SRAM | 8 KB | — |
| Read-While-Write Flash | Up to 2 KB | — |
| SERCOM Modules | 6 | — |
| Peripheral Touch Controller (PTC) | Yes (hardware capacitive touch) | — |
| Integrated Debugger | Yes (EDBG / Xplained Pro on-board) | — |
| Expansion Interface | Xplained Pro / mikroBUS headers | — |
| Operating Temperature (target MCU) | -40 C to +105 C | — |
| Automotive Qualification (target MCU) | AEC-Q100 qualified | — |
| RoHS स्थिति | Compliant | Compliant |
| Series | — | AT91SAMA5 / SAMA5D2 Xplained Ultra |
| Core Architecture | — | 32-bit MPU |
| Maximum CPU Frequency | — | 500 MHz |
| On-board DRAM | — | 128 MB DDR2 SDRAM (1 Gbit) |
| On-board Flash | — | 32 MB QSPI NOR Flash (256 Mbit) |
| Ethernet | — | 10/100 Mbit with on-board PHY |
| USB | — | 2x USB 2.0 High-Speed (Host/Device) |
| Card Slot | — | 1x microSD |
| Display Interface | — | Parallel LCD connector (up to 4.3") |
| Audio | — | Line In / Line Out (on-board codec) |
| CAN | — | 2x CAN-FD |
| On-board Debugger | — | Embedded J-Link OB |
| Expansion Headers | — | Arduino, RPi, MikroElektronika Click |
| Input Voltage | — | 5 V (USB DEBUG or external supply) |
| Packaging | — | Bulk (Box) |
| Product Status | — | Obsolete (per Octopart listing) |