ATSAME54P20A-AF vs ATSAME54-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAME54P20A-AF द्वारा Microchip Technology और ATSAME54-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAME54P20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash, Ethernet | Microchip
ATSAME54P20A-AF ✓ सक्रियMicrochip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAME54P20A-AF | ATSAME54-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M4F with FPU and DSP extensions | — |
| Maximum CPU Clock | 120 MHz | — |
| Program Memory (Flash) | 1 MB (Dual Panel, with ECC) | — |
| Data Memory (SRAM) | 256 KB (with ECC) | — |
| पैकेज | 128-pin TQFP (14x14 mm) | — |
| Operating Voltage | 1.71 V to 3.6 V | — |
| ऑपरेटिंग तापमान | -40 C to +125 C (Extended) | — |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 PTP | — |
| CAN-FD Controllers | 2 (Dual CAN-FD) | — |
| USB Interface | USB 2.0 Full-Speed Host/Device | — |
| ADC | 12-bit, up to 1 Msps, up to 32 channels | — |
| SERCOM Peripherals | Yes (configurable UART/SPI/I2C) | — |
| TrustZone-M | Yes (ARM TrustZone for Cortex-M) | — |
| Cache | 4 KB instruction cache | — |
| RoHS स्थिति | Compliant | Compliant |
| माउंटिंग प्रकार | Surface Mount | — |
| MSL स्तर | 3 | — |
| Lead-Free / Halogen-Free | Yes (per Microchip product page) | — |
| Product Type | — | Evaluation Kit / Development Board |
| Target MCU | — | ATSAME54P20A |
| Core Processor | — | ARM Cortex-M4F (with FPU and DSP extensions) |
| Core Architecture | — | 32-bit RISC |
| Maximum Clock Speed | — | 120 MHz |
| Flash Memory | — | 1 MB dual-panel Flash with ECC (on target MCU) |
| SRAM | — | 256 KB with ECC (on target MCU) |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |