ATSAME70N20A-ANT vs ATSAME70N20B-ANT तुलना
विस्तृत दोनों ओर की तुलना ATSAME70N20A-ANT द्वारा Microchip Technology और ATSAME70N20B-ANT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAME70N20A-ANT - 300MHz Cortex-M7 MCU 1MB Flash | Microchip
ATSAME70N20A-ANT ✓ सक्रियMicrochip Technology
ATSAME70N20B-ANT - ARM Cortex-M7 MCU 300MHz 1MB Flash LQFP-100 | Microchip
ATSAME70N20B-ANT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAME70N20A-ANT | ATSAME70N20B-ANT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M7 with FPU | ARM Cortex-M7 with FPU |
| CPU Architecture | 32-bit RISC, superscalar with branch prediction | — |
| Maximum CPU Clock | 300 MHz | — |
| FPU | Single-precision and double-precision | — |
| Flash Memory | 1 MB (1M x 8) | — |
| SRAM | 384 KB | 384 KB |
| Instruction Cache | 16 KB | — |
| Data Cache | 16 KB | — |
| Memory Protection Unit | Yes | — |
| सप्लाई वोल्टेज | 1.62 V to 3.6 V | — |
| ऑपरेटिंग तापमान | -40 C to +105 C | -40C to +105C (industrial) |
| पैकेज | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| USB | High-Speed USB Host/Device with on-chip PHY | — |
| Ethernet | 10/100 Mbps MAC (GMII/RMII) | — |
| CAN | CAN-FD | — |
| Graphics Accelerator | 2D Pixel Copy engine | — |
| Image Sensor Interface | Yes (12-bit ITU-R BT.601/656) | — |
| External Bus Interface | EBI up to 150 MHz (SDRAM, NAND, NOR) | — |
| RoHS स्थिति | Compliant | Compliant |
| MSL स्तर | [DATA_NEEDED: MSL level] | 3 (per LQFP standard) |
| Core Revision | — | r1p1 (silicon revision B) |
| Maximum Clock Speed | — | 300 MHz |
| Program Memory | — | 1 MB Flash (1M x 8) |
| Supply Voltage Range | — | 1.7 V to 3.6 V |
| GPIO Count | — | 75 |
| Communication Interfaces | — | USB 2.0 High-Speed, 2x CAN-FD, Ethernet MAC, 3x SPI, 4x UART/USART, 2x I2C, HS SD card |
| ADC | — | 12-bit, up to 2 Msps |
| DMA Channels | — | 24 (XDMAC) |
| Supply Current (active) | — | [DATA_NEEDED: active current value] |
| AEC-Q100 | — | Not applicable (industrial-grade) |
| Lead-Free | — | Yes |