ATSAME70N20A-CNT vs ATSAME70Q20B-CNT तुलना
विस्तृत दोनों ओर की तुलना ATSAME70N20A-CNT द्वारा Microchip Technology और ATSAME70Q20B-CNT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAME70N20A-CNT - 300MHz Cortex-M7 MCU 1MB Flash | Microchip
ATSAME70N20A-CNT ✓ सक्रियMicrochip Technology
ATSAME70Q20B-CNT - 300MHz Cortex-M7 MCU 1MB Flash LFBGA-144 | Microchip
ATSAME70Q20B-CNT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAME70N20A-CNT | ATSAME70Q20B-CNT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M7 with FPU (single + double precision) | ARM Cortex-M7 with FPU (single + double precision) |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 300 MHz | — |
| Core Performance | 1500 CoreMark / 600 DMIPS | — |
| Flash Memory | 1024 KB (1 MB) | 1 MB (1024 KB) with ECC |
| SRAM | 384 KB | 384 KB total (TCM + system SRAM) |
| Instruction Cache | 16 KB | — |
| Data Cache | 16 KB | — |
| Tightly-Coupled Memory (TCM) | Yes (ITCM + DTCM) | — |
| Operating Voltage | 1.62 V to 3.6 V (core 1.2 V internal) | — |
| पैकेज | 100-pin TFBGA (9x9 mm) | 144-LFBGA (10x10 mm) |
| ऑपरेटिंग तापमान | -40 C to +105 C (industrial) | -40C to +105C (industrial) |
| माउंटिंग प्रकार | Surface Mount (Tape & Reel, CNT suffix) | Surface Mount (BGA) |
| Supply Voltage Range | 3.0 V to 3.6 V typical (VDDIO/VDDIN) | — |
| USB Interface | USB 2.0 High-Speed PHY integrated | — |
| Ethernet | 10/100 Mbps MAC (GMII/RMII/MII) | — |
| CAN Interface | CAN-FD x2 | — |
| ADC | 12-bit, up to 2 MSPS, 24 channels | — |
| External Bus Interface (EBI) | 16-bit, supports SRAM/SDRAM/NOR up to 128 MB | — |
| RoHS स्थिति | Compliant | Compliant |
| MSL स्तर | 3 (168 hours) | 3 (168 hours) |
| Maximum CPU Clock | — | 300 MHz |
| Operating Voltage (Core) | — | 1.2 V (internal LDO) |
| Operating Voltage (I/O) | — | 3.3 V |
| GPIO Count | — | [DATA_NEEDED: GPIO count from datasheet] |
| Communication Interfaces | — | HS USB Host+Device, 2x CAN-FD, Ethernet GMAC (IEEE 1588), 2x I2C, 4x UART/USART, 2x SPI, QSPI |
| Analog Front End (AFE) | — | Dual 16-bit AFE for motor-control power conversion |
| PWM Channels | — | [DATA_NEEDED: PWM channel count] |
| ADC Resolution | — | Up to 16-bit (via AFE / ADC) |
| Image Sensor Interface | — | Yes (12-bit, up to [DATA_NEEDED: pixel rate]) |