ATSAMG53-XPRO vs ATSAMA5D3-XPLD तुलना
विस्तृत दोनों ओर की तुलना ATSAMG53-XPRO द्वारा Microchip Technology और ATSAMA5D3-XPLD द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMG53-XPRO - SAM G53 Xplained Pro ARM Cortex-M4 Evaluation Kit | Microchip
ATSAMG53-XPRO ObsoleteMicrochip Technology
ATSAMA5D3-XPLD - SAMA5D3 Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D3-XPLD ⚠ अंतिम खरीदविशेषता तुलना
| पैरामीटर | ATSAMG53-XPRO | ATSAMA5D3-XPLD |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | Obsolete | अंतिम बार खरीदें |
| Board Type | Evaluation / Development Platform | — |
| Series | SAM G (Xplained Pro) | — |
| Target MCU | ATSAMG53N19A-AU | — |
| Core Processor | ARM Cortex-M4 with FPU | — |
| Operating Frequency | 48 MHz | — |
| Program Memory | 512 KB Flash | — |
| SRAM | 96 KB | — |
| Core Width | 32-Bit | — |
| On-board Debugger | EDBG (CMSIS-DAP / DGI) | — |
| USB Interfaces | 1x USB-A host, 1x USB-B device | — |
| Storage | 1x microSD card socket | microSD slot + NAND Flash on-board |
| Expansion | Arduino R3 compatible header, 2x mikroBUS click sockets | — |
| User I/O | 4 LEDs, 2 mechanical buttons, 1 reset button | — |
| ऑपरेटिंग सप्लाई वोल्टेज | 5 V (USB powered) | — |
| ऑपरेटिंग तापमान | 0C to +70C (commercial evaluation use) | 0C to +70C (commercial evaluation use) |
| Compliance | RoHS, FCC, IC, CE | RoHS Compliant |
| Mounting | Bench / desk (no enclosure) | — |
| Packaging | Anti-static bag with quick-start guide | — |
| Product Type | — | Embedded Evaluation Board (Xplained Kit) |
| Target MPU | — | ATSAMA5D36 (ARM Cortex-A5) |
| Core | — | ARM Cortex-A5 with FPU |
| Maximum CPU Clock | — | 536 MHz |
| On-chip SRAM | — | 128 KB |
| Cache (I/D) | — | 32 KB each |
| External Memory Interface | — | DDR2 / LPDDR / LPDDR2 + NAND Flash + QSPI |
| Graphics Output | — | HDMI + parallel LCD |
| Ethernet | — | 2x 10/100/1000 GMAC |
| USB | — | 1x USB 2.0 Device, 2x USB 2.0 Host |
| CAN | — | 2x CAN 2.0B |
| Expansion Headers | — | Arduino R3 + Xplained extension header |
| Debug Interface | — | On-board J-Link-OB (JTAG + SWD) + serial console |
| Operating System Support | — | Linux Mainline, Yocto Project, bare-metal C examples |
| Included Accessories | — | micro-AB to Type-A USB cable |