ATSAMG55J19B-MUT vs ATSAMG55J19A-MUT तुलना
विस्तृत दोनों ओर की तुलना ATSAMG55J19B-MUT द्वारा Microchip Technology और ATSAMG55J19A-MUT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMG55J19B-MUT - 120MHz Cortex-M4 MCU, 512KB Flash | Microchip
ATSAMG55J19B-MUT ✓ सक्रियMicrochip Technology
ATSAMG55J19A-MUT - 120MHz Cortex-M4 MCU 512KB Flash | Microchip
ATSAMG55J19A-MUT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMG55J19B-MUT | ATSAMG55J19A-MUT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M4 with FPU (single-precision) and DSP extensions | 32-bit RISC with DSP extensions |
| Maximum CPU Frequency | 120 MHz | — |
| Program Memory (Flash) | 512 KB (512K x 8) | 512 KB (512K x 8) |
| SRAM | 176 KB | — |
| ROM (Boot Loader) | 8 KB | — |
| सप्लाई वोल्टेज | 1.62 V to 3.6 V (single supply) | — |
| ऑपरेटिंग तापमान | -40 C to +85 C (Industrial, MUT suffix) | -40C to +85C (Industrial) |
| पैकेज | 64-QFN MRLB, 7.5 x 7.5 mm with exposed pad | 64-pin QFN (7.5 x 7.5 mm) |
| GPIO Count | Up to 47 | — |
| USB | USB 2.0 Full-Speed Device with on-chip transceiver | USB 2.0 High-Speed with on-chip PHY |
| Audio Interface | I2S / SSC (Synchronous Serial Controller) | — |
| Oscillators | 3 to 20 MHz crystal/ceramic resonator + 3 internal RC oscillators | — |
| Boot Loader | Embedded, supports Flash programming | — |
| Watchdog Timer | Yes | — |
| Power-on Reset / Brown-out Detector | Yes | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | MSL3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating] |
| RoHS स्थिति | Compliant | Compliant |
| Core Processor | — | ARM Cortex-M4 with FPU |
| Maximum Clock Speed | — | 120 MHz |
| RAM Size | — | 176 KB |
| Supply Voltage (VDDIO) | — | 1.62 V to 3.6 V |
| I/O Count | — | [DATA_NEEDED: I/O pin count] |
| Communication Interfaces | — | I2C, SPI, UART/USART, USB, I2S |
| ADC | — | [DATA_NEEDED: ADC channels/resolution] |
| Package Type Code | — | QFN EP T/R (Tape and Reel) |