ATSAML21J16B-AUT vs ATSAMD20J16A-AUT तुलना
विस्तृत दोनों ओर की तुलना ATSAML21J16B-AUT द्वारा Microchip Technology और ATSAMD20J16A-AUT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAML21J16B-AUT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAML21J16B-AUT ✓ सक्रियMicrochip Technology
ATSAMD20J16A-AUT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20J16A-AUT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAML21J16B-AUT | ATSAMD20J16A-AUT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ (ARMv6-M) |
| Maximum CPU Frequency | 48 MHz | — |
| Flash Memory | 64 KB (64K x 8) | — |
| SRAM | 8 KB | 8 KB |
| पैकेज | TQFP-64 (10x10 mm) | 64-pin TQFP with exposed pad (10x10 mm) |
| Operating Voltage Range | 1.62 V to 3.63 V | — |
| Active Mode Current | <35 µA/MHz | — |
| Sleep Mode Current | 200 nA (typical) | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C (industrial) | — |
| ADC | 12-bit, 1 MSPS | 12-bit, up to 1 MSPS |
| USB | USB 2.0 Full-Speed Device with on-chip transceiver | — |
| SERCOM Peripherals | Configurable as UART/SPI/I2C | — |
| RTC | 32-bit Real-Time Clock | — |
| LCD Controller | Integrated, up to 8x32 segments | — |
| CoreMark/MHz | 2.46 | — |
| Carrier Type | Tape & Reel | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| RoHS स्थिति | Compliant | Compliant |
| Core Clock Speed | — | 48 MHz |
| Program Memory (Flash) | — | 64 KB (64K x 8) |
| Supply Voltage (VDD) | — | 1.62 V to 3.63 V |
| ऑपरेटिंग तापमान | — | -40 C to +85 C (Industrial) |
| Communication Interfaces | — | SERCOM (UART/SPI/I2C), USB 2.0 Full-Speed Device |
| GPIO Count | — | [DATA_NEEDED: GPIO count] |
| Timers | — | TC (16-bit), TCC (24-bit PWM) |
| DMA Channels | — | 12 channels |
| Debug Interface | — | SWD (Single-Wire Debug) |
| MSL स्तर | — | MSL3 (per JEDEC J-STD-020) |
| Packaging | — | Tape & Reel (suffix -AUT) |
| Series | — | SAM D20J |