ATSAML22G18A-MUT vs ATSAML22G16A-MUT तुलना
विस्तृत दोनों ओर की तुलना ATSAML22G18A-MUT द्वारा Microchip Technology और ATSAML22G16A-MUT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAML22G18A-MUT - 32MHz ARM Cortex-M0+ 256KB MCU | Microchip
ATSAML22G18A-MUT ✓ सक्रियMicrochip Technology
ATSAML22G16A-MUT - 32MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAML22G16A-MUT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAML22G18A-MUT | ATSAML22G16A-MUT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Processor | ARM Cortex-M0+ | — |
| Core Size | 32-Bit Single-Core | — |
| Core Speed | 32 MHz | — |
| Program Memory | 256 KB (256K x 8) Flash | — |
| RAM Size | 32 KB SRAM [DATA_NEEDED: exact breakdown from datasheet] | — |
| सप्लाई वोल्टेज | 1.6 V to 3.6 V | — |
| ऑपरेटिंग तापमान | -40C to +85C | -40C to +85C |
| पैकेज | 48-VFQFN Exposed Pad (7x7 mm) | 48-pin QFN (7x7 mm) with exposed pad |
| Package Code | HVQCCN-48 | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Connectivity | I2C, SPI, UART/USART, USB | — |
| Peripherals | Brown-out Detect/Reset, DMA, LCD, POR, PWM, WDT | — |
| Number of I/O | [DATA_NEEDED: I/O count from datasheet] | — |
| Active Current | 39 uA/MHz (CoreMark) | — |
| Backup Mode Current | 490 nA (RTC retention) | — |
| ADC | 12-bit, 16-channel [DATA_NEEDED: sample rate] | — |
| Segment LCD | Up to 8x32 segments | — |
| Data Converters | A/D 16x12b | — |
| Oscillator | Internal 32.768 kHz with PLL | — |
| MSL स्तर | 3 (168 hours) [DATA_NEEDED: confirm from datasheet] | 3 (168 hours) |
| RoHS स्थिति | Compliant | Compliant |
| Carrier Type | Tape & Reel | Tape & Reel |
| Series | SAM L22G | — |
| Core Architecture | — | ARM Cortex-M0+ |
| CPU Bit Width | — | 32-bit |
| Maximum CPU Frequency | — | 32 MHz |
| Program Memory (Flash) | — | 64 KB (64K x 8) |
| SRAM | — | 8 KB |
| Supply Voltage (VDD) | — | 1.6 V to 3.6 V |
| Active Current (CoreMark) | — | 39 µA/MHz |
| Backup Mode Current (RTC) | — | 490 nA |
| Lead-Free | — | Yes |
| AEC-Q100 | — | Qualified |
| Crypto Accelerator | — | AES 256-bit |
| LCD Controller | — | Up to 8x40 segments |
| USB | — | USB 2.0 Full-Speed device/host |
| Touch Sensor | — | Peripheral Touch Controller (PTC) |