ATSAML22J17A-MUT vs ATSAML21J18B-AUT तुलना
विस्तृत दोनों ओर की तुलना ATSAML22J17A-MUT द्वारा Microchip Technology और ATSAML21J18B-AUT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAML22J17A-MUT - ARM Cortex-M0+ MCU 128KB Flash 64-QFN | Microchip
ATSAML22J17A-MUT ✓ सक्रियMicrochip Technology
ATSAML21J18B-AUT - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAML21J18B-AUT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAML22J17A-MUT | ATSAML21J18B-AUT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Processor | ARM Cortex-M0+ | — |
| Core Size | 32-Bit | — |
| Maximum CPU Frequency | 32 MHz | 48 MHz |
| Program Memory Type | Flash | — |
| Program Memory Size | 128 KB (128K x 8) | — |
| EEPROM Size | 8 KB (RWWEE) | — |
| RAM Size | [DATA_NEEDED: RAM size] | — |
| Supply Voltage Range | 1.6 V to 3.6 V | — |
| Active Current Consumption | 39 uA/MHz (CoreMark) | — |
| Ultra-Low-Power Backup Mode | 490 nA (RTC running) | — |
| ऑपरेटिंग तापमान रेंज | -40C to +85C | — |
| पैकेज / केस | 64-QFN (9x9 mm) with exposed pad | — |
| माउंटिंग प्रकार | Surface Mount, Tape & Reel | Surface Mount (Tape & Reel, AUT suffix) |
| Number of I/O Pins | [DATA_NEEDED: I/O count] | — |
| Connectivity | I2C, SPI, UART, USB 2.0 Full-Speed Device | — |
| Peripherals | SLCD controller, 12-bit ADC, RTC, multiple SERCOM | — |
| RoHS स्थिति | Compliant | Compliant |
| Green Compliance | Yes (lead-free, halogen-free per datasheet suffix MUT) | — |
| Core Architecture | — | ARM Cortex-M0+ (32-bit) |
| Series | — | SAM L21J, Functional Safety (FuSa) |
| Program Flash | — | 256 KB (256K x 8) |
| SRAM | — | 32 KB (up to 40 KB reported by some sources) |
| Supply Voltage (Vcc/Vdd) | — | 1.62 V to 3.63 V |
| ऑपरेटिंग तापमान | — | -40 C to +85 C (industrial) |
| पैकेज | — | 64-pin TQFP (10x10 mm) |
| GPIO Count | — | 51 (per SAM L21J datasheet) |
| USB | — | USB 2.0 Full-Speed Device |
| Serial Interfaces | — | Multiple SERCOM (configurable as UART/SPI/I2C) |
| ADC | — | 12-bit |
| DAC | — | 10-bit |
| Touch Peripheral (PTC) | — | Yes (Peripheral Touch Controller) |
| Active Current | — | Under 35 uA/MHz |
| Sleep Current | — | 200 nA |
| Functional Safety | — | IEC 60730 Class B (FuSa variant) |
| Carrier Type | — | Tape & Reel (AUT suffix) |