BQ7791500PWR vs BQ7791506PWR तुलना
विस्तृत दोनों ओर की तुलना BQ7791500PWR द्वारा Texas Instruments और BQ7791506PWR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | BQ7791500PWR | BQ7791506PWR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Battery Management | Battery Management |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Battery Type | Lithium Ion / Lithium Polymer | — |
| Number of Cells Supported | 3S to 5S (stackable for higher counts) | — |
| फ़ंक्शन | Primary protection (OV / UV / OCD / SCD) + autonomous cell balancing | Primary Battery Protector with Autonomous Cell Balancing |
| Cell Balancing Current | Up to 100 mA (integrated FET, autonomous) | — |
| Output Drive | CHG and DSG low-side N-FET drivers | — |
| Operating Mode | NORMAL and HIBERNATE (ultra-low Iq) modes | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +85 C | -40°C to +85°C |
| पैकेज | 24-TSSOP (PW), 4.40 mm body width | 24-pin TSSOP (PW) |
| पिन काउंट | 24 | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | [DATA_NEEDED: MSL level] | 2 |
| Supply Voltage (BAT pin) | 4 V to 25 V (5S pack headroom) | — |
| Communication Interface | None (fully autonomous, no SMBus / I2C) | Hardware-only (no I2C/SPI required for protection) |
| External NTC Support | Yes (TS pin) | — |
| RoHS स्थिति | Compliant | — |
| Lead-Free | Yes | — |
| Cell Chemistry Supported | — | Lithium Ion / Lithium Polymer |
| Number of Cells (Standalone) | — | 3 to 5 series |
| Stackable Cell Count | — | Up to 10 series (two devices stacked) |
| Quiescent Current - NORMAL | — | 8 µA (typical) |
| Quiescent Current - HIBERNATE | — | 2 µA (typical) |
| Cell Balancing | — | Autonomous smart passive balancing |
| Protection Features | — | Overvoltage, Undervoltage, Overcurrent Discharge, Short-Circuit Discharge, Overtemperature |
| Lead-Free / RoHS | — | Yes (per TI product page) |
| Supply Voltage (BAT) | — | [DATA_NEEDED: V_BAT range] |
| OVP Threshold Tolerance | — | [DATA_NEEDED: OVP tolerance] |