BTN9970LVAUMA1 vs BTN9990LVAUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTN9970LVAUMA1 द्वारा Infineon और BTN9990LVAUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTN9970LVAUMA1 BTN9970LVAUMA1 - Integrated Half-Bridge 9.7mΩ 60A NovalithIC+ | Infineon

BTN9970LVAUMA1 - Integrated Half-Bridge 9.7mΩ 60A NovalithIC+ | Infineon

BTN9970LVAUMA1 ✓ सक्रिय
Infineon
BTN9990LVAUMA1 BTN9990LVAUMA1 - 60V Half-Bridge Motor Driver | Infineon

BTN9990LVAUMA1 - 60V Half-Bridge Motor Driver | Infineon

BTN9990LVAUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTN9970LVAUMA1 BTN9990LVAUMA1
ब्रांड Infineon Infineon
श्रेणी Motor Drivers Motor Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Integrated Half-Bridge Motor Driver (NovalithIC+) —
टोपोलॉजी P-channel high-side + N-channel low-side half-bridge Half-Bridge (integrated high-side + low-side MOSFETs)
R_DS(on) (typ) 9.7 mΩ per switch leg —
Peak Current Detection 60 A —
Operating Voltage Range [DATA_NEEDED: exact min/max VCC] —
Load Voltage Tolerance (transient) [DATA_NEEDED: V_load max] —
PWM Input Logic Level TTL/CMOS-compatible (3.3 V and 5 V) —
Charge Pump Not required (p-channel high-side) Integrated, supports 100% duty cycle
Integrated Protection Overtemperature, overcurrent, undervoltage, short-circuit —
Current Sense Output Yes (IS pin proportional to load current) —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: -40C to +150C typ] —
पैकेज PG-HSOF-7-1 (7-pin exposed-pad SMD) PG-HSOF-7-1 (7-pin, exposed pad)
माउंटिंग प्रकार Surface Mount Surface Mount
Target Motor Voltage 12 V nominal (24 V supported) —
RoHS स्थिति Compliant Compliant
MSL स्तर [DATA_NEEDED: MSL rating] MSL3 (per JEDEC J-STD-020)
Driver IC Integration Yes (monolithic gate driver + FETs) —
Load Type — Brushed DC motors, solenoids, resistive/inductive loads
Drain-Source Voltage (VDS max) — 60 V
Continuous Load Current — [DATA_NEEDED: continuous current A]
RDS(on) (typ) — [DATA_NEEDED: RDS(on) per leg mOhm]
Logic Supply (VCC) — 4.5 V to 5.5 V (5 V typ)
Load Supply (VS) — 6 V to 60 V
Control Inputs — Logic-level (3.3 V / 5 V) INH and INL
Protection Features — UVLO, over-current, over-temperature, short-circuit
ऑपरेटिंग तापमान — -40 C to +150 C (junction)
Automotive Qualified — Yes (AEC-Q100, MOTIX family)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध