BTS134DATMA1 vs BTS4142NHUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS134DATMA1 द्वारा Infineon और BTS4142NHUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS134DATMA1 BTS134DATMA1 - 42V 3.5A Smart Low-Side Power Switch | Infineon

BTS134DATMA1 - 42V 3.5A Smart Low-Side Power Switch | Infineon

BTS134DATMA1 ✓ सक्रिय
Infineon
BTS4142NHUMA1 BTS4142NHUMA1 - 1.4A 24V Smart High-Side Switch | Infineon

BTS4142NHUMA1 - 1.4A 24V Smart High-Side Switch | Infineon

BTS4142NHUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS134DATMA1 BTS4142NHUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Manufacturer Infineon Technologies —
Product Series HITFET (BTS134) —
Switch Type N-Channel Low-Side Smart Power Switch —
Technology Smart SIPMOS (vertical DMOS + protection IC) —
Input Type Logic Level —
Number of Channels 1 1
आउटपुट कॉन्फ़िगरेशन Low-Side —
Continuous Drain Current (ID) 3.5 A —
Operating Voltage (VLoad) 42 V (max) —
Drain-Source Voltage (VDS) 42 V —
On-State Resistance (RDS(on)) [DATA_NEEDED: RDS(on) at VGS=5V, TJ=25C] 70 mOhm (typical)
Input Logic Threshold (VIH/VIL) Logic-level (3.3 V / 5 V compatible GPIO) —
ESD Protection (Input Pin) Yes (embedded) Yes
थर्मल शटडाउन Yes (auto-restart) —
Current Limitation Yes —
Overload Protection Yes Yes (current limiting)
Short-Circuit Protection Yes —
Overvoltage Protection (Load Dump) Yes —
पैकेज PG-TO252-3-11 (DPAK, 2 leads + tab, SC-63) PG-SOT223-4
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: TJ min/max -40C to +150C is typical for HITFET] —
Automotive Qualification AEC-Q100 (per Arrow listing) —
RoHS स्थिति Compliant (Green product) Compliant
Packing Tape & Reel (T&R) —
MSL स्तर [DATA_NEEDED: MSL rating] —
Product Type — Smart High-Side Power Switch (Classic PROFET 24V)
Switch Topology — High-side, N-channel vertical MOSFET
Nominal Output Current — 1.4 A
ऑपरेटिंग सप्लाई वोल्टेज — 6 V to 42 V
Load-Dump Protection — Yes (integrated overvoltage clamp)
Thermal Protection — Yes (shutdown with auto-restart)
Undervoltage Shutdown — Yes (auto-restart with hysteresis)
Diagnostic Feedback — Yes (open-load, fault)
ऑपरेटिंग तापमान — -40C to +150C (junction)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध