BTS3028SDLATMA1 vs ITS4140NHUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS3028SDLATMA1 द्वारा Infineon और ITS4140NHUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS3028SDLATMA1 BTS3028SDLATMA1 - 5A Low-Side Smart Switch | Infineon

BTS3028SDLATMA1 - 5A Low-Side Smart Switch | Infineon

BTS3028SDLATMA1 ✓ सक्रिय
Infineon
ITS4140NHUMA1 ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS3028SDLATMA1 ITS4140NHUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart Low-Side Power Switch —
टोपोलॉजी 1:1 N-Channel, Single Channel 1:1 (Input to Output)
Load Supply Voltage Range 2 V to 10 V —
Continuous Drain Current (I_D) 5 A —
On-State Resistance (R_DS(on)) 28 mΩ (typ at 25 °C, V_IN = 5 V) —
Overvoltage Clamp Yes (integrated) —
Overtemperature Shutdown Yes (integrated) —
Current Limitation Yes (integrated) —
ESD Protection Yes (integrated) —
STATUS Feedback Pin Yes —
ऑपरेटिंग तापमान रेंज -40 °C to +150 °C (T_j) -40 C to +125 C
पैकेज PG-TO252-3-11 (DPAK, 3-pin + tab) PG-SOT223-4 (3+Tab)
माउंटिंग प्रकार Surface Mount Surface Mount
Automotive Qualification AEC-Q100 qualified —
RoHS स्थिति Compliant Compliant
फ़ंक्शन — High-Side Power Switch / Load Driver
Switch Type — N-Channel (vertical, integrated)
Output Current (Continuous) — 200 mA
Supply Voltage Range (Vbb) — 4.9 V to 60 V
Load Dump Withstand — [DATA_NEEDED: load-dump transient rating per ISO 7637]
On-Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) in ohms]
Short-Circuit Protection — Yes (current limit + thermal shutdown)
Overload Protection — Yes
Overvoltage Protection — Yes (including load dump)
Inductive Load Clamping — Yes (active negative-voltage clamp at output)
Diagnostic Output — Yes (status/IN pin feedback)
MSL स्तर — 1 (per JEDEC J-STD-020)
Automotive Qualified — [DATA_NEEDED: AEC-Q100 grade]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध