BTS428L2 vs BTT6020-1ERA तुलना
विस्तृत दोनों ओर की तुलना BTS428L2 द्वारा Infineon और BTT6020-1ERA द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | BTS428L2 | BTT6020-1ERA |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Smart High-Side Power Switch (Classic PROFET) | Single-channel Smart High-Side Power Switch (PROFET) |
| टोपोलॉजी | Single-channel high-side N-channel MOSFET with charge pump | — |
| Nominal Operating Voltage | 24 V (automotive 12 V/24 V board net) | — |
| Maximum Continuous Load Current | 5.8 A | — |
| On-State Resistance (RDS(on)) | 60 mΩ (typical) | — |
| Number of Channels | 1 | — |
| Status Feedback | Yes (dedicated status pin) | — |
| ओवरकरंट प्रोटेक्शन | Yes (integrated) | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overtemperature Protection | Yes (integrated thermal shutdown) | — |
| Overvoltage Protection | Yes (load-dump tolerant) | — |
| Reverse Battery Protection | Yes (integrated) | — |
| Standby Current | Low standby current (green/RoHS-compliant device) | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +150 °C | -40 °C to +150 °C |
| पैकेज | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) | PG-TDSO-14 with Exposed Pad (14-pin) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| RoHS Compliance | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) | Compliant |
| Technology | — | Smart6 (N-channel vertical MOSFET + charge pump) |
| On-State Resistance (typ) | — | 20 mΩ |
| Nominal Load Current (continuous) | — | 7 A |
| Operating Voltage Range (Vbb) | — | 5 V to 42 V (24 V nominal) |
| Load-Dump Transient Rating | — | Up to 42 V / 24 V system |
| Maximum Junction Temperature | — | 150 °C |
| Protection Functions | — | Overcurrent, Short-Circuit (Latch), Overtemperature, Overvoltage clamp, Undervoltage Lockout (UVLO), Reverse Battery |
| Diagnostic Function | — | Current-sense output on DEN pin |
| ESD Protection | — | Yes (IN and DEN pins) |
| Target Application | — | 24V automotive lighting and resistive loads up to 5 x P21W or 1 x 70W |
| AEC-Q100 Status | — | Qualified (automotive grade) |