BTS428L2ATMA1 vs ITS4300SSJDXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS428L2ATMA1 द्वारा Infineon और ITS4300SSJDXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ सक्रिय
Infineon
ITS4300SSJDXUMA1 ITS4300SSJDXUMA1 - 400mA Smart High-Side Switch | Infineon

ITS4300SSJDXUMA1 - 400mA Smart High-Side Switch | Infineon

ITS4300SSJDXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS428L2ATMA1 ITS4300SSJDXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch —
Technology Smart SIPMOS (vertical N-channel MOSFET with charge pump) —
Number of Channels 1 —
Input Type CMOS-compatible, ground-referenced —
On-State Resistance (R_DS(on)) 50 mOhm (typical) —
Continuous Load Current 5.8 A —
ऑपरेटिंग सप्लाई वोल्टेज [DATA_NEEDED: nominal and range] —
Standby Current Very low (per datasheet) —
Overvoltage Protection Load-dump / overvoltage clamp —
Overtemperature Protection Yes, with autorestart —
Diagnostic Feedback Yes (open-load, short-circuit, overtemperature) —
पैकेज PG-TO252-5-11 (DPAK-5, 4 leads + tab) PG-DSO-8
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: min/max] [DATA_NEEDED: full operating temperature range]
RoHS / Pb-Free Yes (Green product, Pb-free finish, J-STD-020) —
Soldering Pb-free reflow per IPC/JEDEC J-STD-020 —
Qualification Automotive-grade (PROFET family) Industrial per JEDEC JESD47
Part Number — ITS4300SSJDXUMA1
Manufacturer — Infineon Technologies
Product Family — PROFET (PROtected FET) Industrial
फ़ंक्शन — Smart high-side power switch / load driver
Switch Type — 1:1 N-Channel high-side
Output Current (Continuous) — 400 mA
On-State Resistance RDS(on) — 300 mΩ (typical)
Supply Voltage Range — [DATA_NEEDED: operating supply voltage range]
Load Voltage — 12 V / 24 V DC applications
Control Interface — CMOS-compatible logic input
Protection Features — Overload, short-circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown, fast demagnetization
ESD Protection — Yes
RoHS Compliance — Compliant (per Infineon product page)
MSL स्तर — [DATA_NEEDED: MSL rating]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध