BTS6143DAUMA1 vs IPS521R तुलना

विस्तृत दोनों ओर की तुलना BTS6143DAUMA1 द्वारा Infineon और IPS521R द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS6143DAUMA1 BTS6143DAUMA1 - 8A Smart High-Side Switch | Infineon | Automotive PROFET

BTS6143DAUMA1 - 8A Smart High-Side Switch | Infineon | Automotive PROFET

BTS6143DAUMA1 ✓ सक्रिय
Infineon
IPS521R IPS521R - 5A Fully Protected High Side MOSFET Switch | Infineon

IPS521R - 5A Fully Protected High Side MOSFET Switch | Infineon

IPS521R ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS6143DAUMA1 IPS521R
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch (PROFET) —
Number of Channels 1 —
टोपोलॉजी High-Side 1:1 N-Channel high-side switch
आउटपुट कॉन्फ़िगरेशन N-Channel vertical MOSFET —
Nominal Load Voltage (Vbb) 12 V (automotive) —
Operating Voltage Range (Vbb) [DATA_NEEDED: operating voltage range] —
Continuous Output Current (IL) 8 A (typical) —
On-State Resistance (R_DS(on)) [DATA_NEEDED: typical R_DS(on) in mOhm] —
Short-Circuit Protection Yes (with latch) Yes, current-limit foldback
Current Limitation Yes —
Overload Protection Yes —
थर्मल शटडाउन Yes (with auto-restart) —
Overvoltage Protection Yes (including load dump) —
Loss-of-Ground Protection Yes —
Loss-of-Vbb Protection Yes —
Diagnostic Output Yes (status/fault feedback) —
Operating Temperature Range (Tj) -40 C to +150 C —
पैकेज PG-TO252-5-11 (DPAK-5, 4 leads + tab) TO-220-5 (5-lead TO-220AB)
माउंटिंग प्रकार Surface Mount Through-hole
Automotive Grade Yes (AEC-Q100 qualified PROFET family) —
फ़ंक्शन — High-side intelligent power switch (IPS)
Continuous Load Current — 5 A
On-Resistance (Rds(on)) — [DATA_NEEDED: typical Rds(on) in milliohms]
Load Voltage Range — [DATA_NEEDED: Vload operating range]
Supply Voltage (Vcc) — [DATA_NEEDED: Vcc min/max]
Current Limit (Ilim) — Internally regulated (see datasheet curve)
Over-Temperature Protection — Yes, with auto-restart
Active Clamp (Inductive Load) — Yes
ESD Protection — Yes, on all pins
Open-Load Detection — Yes, in off state
Status Feedback / Diagnostic — Yes, via isolated logic ground
ऑपरेटिंग तापमान — -40C to +125C (junction)
RoHS स्थिति — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध