BTS700201ESPXUMA2 vs BTS70082EPAXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS700201ESPXUMA2 द्वारा Infineon और BTS70082EPAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS700201ESPXUMA2 BTS700201ESPXUMA2 - 23.2A Smart High-Side Switch | Infineon

BTS700201ESPXUMA2 - 23.2A Smart High-Side Switch | Infineon

BTS700201ESPXUMA2 ✓ सक्रिय
Infineon
BTS70082EPAXUMA1 BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET

BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET

BTS70082EPAXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS700201ESPXUMA2 BTS70082EPAXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Manufacturer Infineon Technologies —
Product Family PROFET+2 12V PROFET+2 (12 V, dual channel)
फ़ंक्शन Smart High-Side Power Switch —
टोपोलॉजी 1:1 N-Channel High-Side —
Maximum Continuous Load Current 23.2 A —
Typical RDS(ON) 8.5 mOhm —
Datasheet RDS(ON) 2.3 mOhm —
Maximum Load Voltage 70 V —
Operating Voltage Range 4 V to 28 V (12 V nominal) —
पैकेज PG-TSDSO-24-32 PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD)
पिन काउंट 24 —
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज -40C to +150C (TJ) —
Automotive Qualification AEC-Q100 qualified —
RoHS स्थिति Compliant Compliant
Diagnostic Output IS pin (current sense) Current-sense (IS) pin, analog/digital
Protection Features Reverse battery, over-current, over-temperature, ground loss Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss
Switch Type — High-side N-channel MOSFET switch
Number of Channels — 2
On-Resistance (RDS(on)) per channel — 16 mΩ typical (8 mΩ channel-on resistance per channel pair)
Continuous Load Current per channel — 7.5 A
Nominal Supply Voltage — 12 V
Operating Supply Voltage Range — 3.1 V to 28 V
Load Dump / Transient Tolerance — 42 V per ISO 7637-2
Reverse Battery Protection — -16 V
Standby Current — [DATA_NEEDED: standby current uA]
Current Sense (IS) Ratio kILIS — 5000 (typical)
ऑपरेटिंग जंक्शन तापमान — -40 °C to +150 °C
AEC-Q100 Qualification — Yes (Automotive Grade)
MSL स्तर — MSL3 (per JEDEC J-STD-020)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध