BTS70081EPAXUMA1 vs BTS70082EPAXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS70081EPAXUMA1 द्वारा Infineon और BTS70082EPAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS70081EPAXUMA1 BTS70081EPAXUMA1 - 10A Smart High-Side Switch | Infineon PROFET

BTS70081EPAXUMA1 - 10A Smart High-Side Switch | Infineon PROFET

BTS70081EPAXUMA1 ✓ सक्रिय
Infineon
BTS70082EPAXUMA1 BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET

BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET

BTS70082EPAXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS70081EPAXUMA1 BTS70082EPAXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch (PROFET) —
टोपोलॉजी 1:1 N-Channel High-Side Switch —
Continuous Load Current 10 A —
On-State Resistance (RDS(on) typ.) 9 mOhm —
ऑपरेटिंग सप्लाई वोल्टेज 6 V to 18 V —
Load-Dump Survival Voltage 28 V (per AEC-Q100) —
Standby Current [DATA_NEEDED: standby current in uA] [DATA_NEEDED: standby current uA]
Current Limitation (typ.) [DATA_NEEDED: IL(LIM) value] —
Diagnostic Output Open-drain status / current sense Current-sense (IS) pin, analog/digital
Protection Features Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss
ऑपरेटिंग तापमान रेंज -40 C to +150 C (Tj) —
पैकेज PG-TSDSO-14-22 (14-pin, exposed pad) PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD)
Package Width 3.90 mm (TSSOP-14 EP equivalent) —
माउंटिंग प्रकार Surface Mount Surface Mount
AEC-Q100 Qualification Qualified (automotive grade) Yes (Automotive Grade)
RoHS स्थिति Compliant Compliant
MSL स्तर [DATA_NEEDED: MSL rating] MSL3 (per JEDEC J-STD-020)
Lead-Free Yes —
Product Family — PROFET+2 (12 V, dual channel)
Switch Type — High-side N-channel MOSFET switch
Number of Channels — 2
On-Resistance (RDS(on)) per channel — 16 mΩ typical (8 mΩ channel-on resistance per channel pair)
Continuous Load Current per channel — 7.5 A
Nominal Supply Voltage — 12 V
Operating Supply Voltage Range — 3.1 V to 28 V
Load Dump / Transient Tolerance — 42 V per ISO 7637-2
Reverse Battery Protection — -16 V
Current Sense (IS) Ratio kILIS — 5000 (typical)
ऑपरेटिंग जंक्शन तापमान — -40 °C to +150 °C

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध