BTT3050EJXUMA1 vs ITS4140NHUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTT3050EJXUMA1 द्वारा Infineon और ITS4140NHUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTT3050EJXUMA1 BTT3050EJXUMA1 - 4A Smart Low-Side Switch | Infineon HITFET+24V

BTT3050EJXUMA1 - 4A Smart Low-Side Switch | Infineon HITFET+24V

BTT3050EJXUMA1 ✓ सक्रिय
Infineon
ITS4140NHUMA1 ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTT3050EJXUMA1 ITS4140NHUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart Low-Side Power Switch —
Family HITFET+24V —
Number of Channels 1 —
Switch Topology Low-Side —
Nominal Load Current 4 A —
Typical On-Resistance (RDS(on)) 50 mΩ —
Operating Voltage Range 6 V to 36 V —
Maximum Supply Voltage [DATA_NEEDED: maximum VBB] —
Input Type Active High, Logic Level —
Diagnostic Output Yes (open-drain / status pin) Yes (status/IN pin feedback)
Operating Temperature Range (Junction) -40 °C to +150 °C —
पैकेज PG-TDSO-8-31 (exposed-pad SOIC-8) PG-SOT223-4 (3+Tab)
माउंटिंग प्रकार Surface Mount Surface Mount
Automotive Qualification Yes (AEC-Q100) —
Protection Features Overcurrent, Overtemperature, Short-Circuit, Overvoltage, Undervoltage Lockout, Latch —
ESD Protection Yes —
RoHS स्थिति Compliant Compliant
फ़ंक्शन — High-Side Power Switch / Load Driver
टोपोलॉजी — 1:1 (Input to Output)
Switch Type — N-Channel (vertical, integrated)
Output Current (Continuous) — 200 mA
Supply Voltage Range (Vbb) — 4.9 V to 60 V
Load Dump Withstand — [DATA_NEEDED: load-dump transient rating per ISO 7637]
On-Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) in ohms]
Short-Circuit Protection — Yes (current limit + thermal shutdown)
Overload Protection — Yes
Overvoltage Protection — Yes (including load dump)
Inductive Load Clamping — Yes (active negative-voltage clamp at output)
ऑपरेटिंग तापमान रेंज — -40 C to +125 C
MSL स्तर — 1 (per JEDEC J-STD-020)
Automotive Qualified — [DATA_NEEDED: AEC-Q100 grade]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध