BTT60302EKAXUMA1 vs BTS428L2 तुलना
विस्तृत दोनों ओर की तुलना BTT60302EKAXUMA1 द्वारा Infineon और BTS428L2 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | BTT60302EKAXUMA1 | BTS428L2 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Manufacturer | Infineon Technologies | — |
| Product Type | Dual-channel high-side power switch (PROFET) | Smart High-Side Power Switch (Classic PROFET) |
| आउटपुट की संख्या | 2 | — |
| Configuration | High-side switch, 1:1 N-channel | — |
| Nominal Operating Voltage | 28 V | 24 V (automotive 12 V/24 V board net) |
| Load Voltage Range | 5 V to 36 V (load-dump tolerant) | — |
| On-State Resistance (per channel, max) | 200 mOhm at Tj=25C | — |
| Continuous Load Current (per channel) | 4 A | — |
| Current Limit (typ) | [DATA_NEEDED: current limit per channel] | — |
| Turn-on / Turn-off Time | 150 us (typ) | — |
| Input Type | CMOS-compatible logic input per channel | — |
| Diagnostic Output | Current-sense analog output | — |
| Protection Features | Short-circuit, over-load, over-voltage, over-temperature, reverse battery | — |
| ऑपरेटिंग तापमान रेंज | -40C to +150C (Tj) | -40 °C to +150 °C |
| पैकेज | PG-DSO-14-40 EP (14-pin SOIC with exposed pad) | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) |
| Package Outline | SOIC-14 (0.154 in / 3.90 mm width), EP | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified | — |
| RoHS स्थिति | Compliant | — |
| टोपोलॉजी | — | Single-channel high-side N-channel MOSFET with charge pump |
| Maximum Continuous Load Current | — | 5.8 A |
| On-State Resistance (RDS(on)) | — | 60 mΩ (typical) |
| Number of Channels | — | 1 |
| Status Feedback | — | Yes (dedicated status pin) |
| ओवरकरंट प्रोटेक्शन | — | Yes (integrated) |
| Short-Circuit Protection | — | Yes (integrated) |
| Overtemperature Protection | — | Yes (integrated thermal shutdown) |
| Overvoltage Protection | — | Yes (load-dump tolerant) |
| Reverse Battery Protection | — | Yes (integrated) |
| Standby Current | — | Low standby current (green/RoHS-compliant device) |
| RoHS Compliance | — | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) |