CP2104-F03-GMR vs CP2103-GM तुलना
विस्तृत दोनों ओर की तुलना CP2104-F03-GMR द्वारा Silicon Labs और CP2103-GM द्वारा Silicon Labs. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | CP2104-F03-GMR | CP2103-GM |
|---|---|---|
| ब्रांड | Silicon Labs | Silicon Labs |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | USB 2.0 to UART bridge controller | — |
| USB Standard | USB 2.0 full speed, 12 Mbps | — |
| UART Channels | 1 | — |
| Baud Rate Range | 300 bps to 2 Mbps (programmable) | — |
| FIFO Buffer | 576 byte | — |
| सप्लाई वोल्टेज | 3 V to 3.6 V (VDD) | — |
| I/O Supply (VIO) | 1.8 V, 3 V to 3.6 V | — |
| On-Chip Regulator Output | 3.45 V | — |
| Non-Volatile Memory | 1024 byte one-time-programmable ROM | — |
| GPIO | 4 digital I/O pins | — |
| Flow Control | ~RTS, ~CTS, ~DTR, ~DSR, ~DCD, ~RI | — |
| पैकेज | 24-QFN (4x4 mm) with exposed pad | 28-QFN |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| ऑपरेटिंग तापमान | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| Integrated Clock | Yes (no external crystal required) | Yes |
| Integrated USB Transceiver | Yes (no external resistors required) | Yes |
| Power-On Reset | On-chip | — |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | USB 2.0 to UART bridge controller |
| USB Interface | — | USB 2.0 |
| UART Interface | — | UART |
| Operating Voltage | — | 1.8 V to 3.6 V |
| Package Dimensions | — | 5 mm × 5 mm |
| Exposed Pad | — | Yes |
| External Crystal Required | — | No external crystal required |
| Integrated EEPROM | — | 1024 bytes |
| EEPROM Functions | — | Vendor ID, product ID, serial number, power descriptor, and release number |
| RS-232/RS-485 Design Support | — | USB bridge solution for updating RS-232 and RS-485 designs |
| Interface Category | — | USB interface controller |
| Maximum USB Current | — | [DATA_NEEDED: maximum USB current] |
| UART Baud Rate | — | [DATA_NEEDED: UART baud-rate range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |