CP2108-B03-GM vs CP2108-B01-GMR तुलना
विस्तृत दोनों ओर की तुलना CP2108-B03-GM द्वारा Silicon Labs और CP2108-B01-GMR द्वारा Silicon Labs. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Silicon Labs
CP2108-B01-GMR - USB-to-Quad-UART Bridge | Silicon Labs | 64-QFN
CP2108-B01-GMR ✓ सक्रियविशेषता तुलना
| पैरामीटर | CP2108-B03-GM | CP2108-B01-GMR |
|---|---|---|
| ब्रांड | Silicon Labs | Silicon Labs |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | USB 2.0 full-speed to quad-UART bridge controller | — |
| सप्लाई वोल्टेज | 3 V to 3.6 V | — |
| USB Standard | USB 2.0 full-speed | — |
| UART Channel Count | 4 asynchronous serial data buses | — |
| Digital I/O Count | 16 pins | — |
| Integrated Functions | USB function controller, USB transceiver, oscillator, EEPROM, and four UARTs | — |
| Modem Control | Full modem-control signals | — |
| On-Chip EEPROM | Included | — |
| Customizable USB Vendor ID | Supported by on-chip EEPROM | — |
| Customizable USB Product ID | Supported by on-chip EEPROM | — |
| Customizable Product Description | Supported by on-chip EEPROM | — |
| पैकेज | 64-QFN, 9 mm x 9 mm | 64-pin QFN EP, 9 mm x 9 mm |
| Package Pin Count | 64 pins | — |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| Host Driver Support | Royalty-free drivers | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | -40C to +85C |
| Maximum UART Baud Rate | [DATA_NEEDED: maximum UART baud rate] | — |
| USB D+/D- Signaling | [DATA_NEEDED: USB data and signaling details] | — |
| RoHS स्थिति | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| फ़ंक्शन | — | USB to Quad UART Bridge Controller |
| USB Specification | — | USB 2.0 Full-Speed (12 Mbps) |
| Number of UART Channels | — | 4 |
| UART Data Rate | — | 300 baud to 2 Mbaud |
| Supply Voltage (VBUS) | — | 3.0 V to 5.25 V |
| Internal LDO Output | — | 3.3 V (on-chip regulator) |
| I/O Voltage (VIO) | — | 1.8 V to 3.3 V (level shifters) |
| GPIO Pins | — | 16 (GPIO.0 to GPIO.15) |
| On-chip OTP Memory | — | 512 bytes |
| Internal Oscillator | — | 48 MHz (no external crystal required) |
| Flow Control | — | Hardware (RTS/CTS, DTR/DSR) and software (XON/XOFF) |
| MSL स्तर | — | [DATA_NEEDED: MSL Level] |
| Drivers | — | Royalty-free VCP drivers (Windows, macOS, Linux) |