CP2109-A01-GMR vs CP2105-F01-GMR तुलना
विस्तृत दोनों ओर की तुलना CP2109-A01-GMR द्वारा Silicon Labs और CP2105-F01-GMR द्वारा Silicon Labs. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | CP2109-A01-GMR | CP2105-F01-GMR |
|---|---|---|
| ब्रांड | Silicon Labs | Silicon Labs |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Manufacturer | Silicon Labs | — |
| फ़ंक्शन | USB Bridge, USB to UART | — |
| Protocol | USB | — |
| इंटरफ़ेस | UART | — |
| Standards | USB 2.0 | — |
| सप्लाई वोल्टेज | 3.0 V to 3.6 V | 1.8 V or 3.3 V |
| Operating Supply Current | 17 mA (typical, per Cross-Reference data) | — |
| FIFO Buffer | 640 Byte | — |
| USB Speed | Full-Speed 12 Mbps | USB 2.0 full speed |
| Number of UART Channels | 1 | — |
| Data Bits | 5, 6, 7, 8 | — |
| Baud Rate Range | 300 bps to 1 Mbaud | — |
| पैकेज | 28-QFN (5x5 mm) with Exposed Pad | QFN-24, 4 x 4 mm |
| माउंटिंग प्रकार | Surface Mount | — |
| ऑपरेटिंग तापमान | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| Device Type | — | USB 2.0 full-speed to dual UART interface bridge |
| UART Channels | — | 2 asynchronous serial data buses |
| Integrated USB Transceiver | — | Yes |
| Integrated Clock Generator | — | Yes |
| External Crystal Required | — | No |
| One-Time Programmable ROM | — | 296 bytes |
| Integrated Voltage Regulator | — | 3.45 V output |
| Power-On Reset | — | On-chip |
| Baud Rate | — | Programmable |
| Hardware Flow Control | — | Supported |
| Modem Control Signals | — | Full modem control signals |
| USB Termination Resistors | — | Not required; integrated USB transceiver |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |