DG212CJ+ vs DG212DJ+ तुलना

विस्तृत दोनों ओर की तुलना DG212CJ+ द्वारा Intersil और DG212DJ+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Intersil
DG212CJ+ DG212CJ+ - Quad SPST CMOS Analog Switch | Intersil

DG212CJ+ - Quad SPST CMOS Analog Switch | Intersil

DG212CJ+ ✓ सक्रिय
Analog Devices
DG212DJ+ DG212DJ+ - Quad SPST CMOS Analog Switch | Analog Devices

DG212DJ+ - Quad SPST CMOS Analog Switch | Analog Devices

DG212DJ+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर DG212CJ+ DG212DJ+
ब्रांड Intersil Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Number of Channels 4 channels —
Switch Configuration 4 x SPST 1:1 SPST
Initial Switch State Normally open —
On Resistance 175 ohm maximum 175 ohm
Dual Supply Voltage Range ±4.5 V to ±18 V —
Turn-On Time 1000 ns maximum —
Turn-Off Time 500 ns maximum —
Control Input Type Inverted digital control inputs —
Signal-to-Noise Ratio 120 dB typical —
Off Isolation -60 dB typical at 1 MHz —
Channel-to-Channel Match 5 ohm typical —
पैकेज 16-pin PDIP 16-pin PDIP
माउंटिंग प्रकार Through-hole Through-hole
Process Technology CMOS monolithic —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
सप्लाई करंट [DATA_NEEDED: supply current] —
Power Consumption [DATA_NEEDED: power consumption] [DATA_NEEDED: power consumption]
RoHS स्थिति [DATA_NEEDED: RoHS status] RoHS Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Number of Circuits — 4 circuits
Switch Type — Normally open SPST
Positive Supply Voltage Range — +4.5 V to +18 V
Negative Supply Voltage Range — -4.5 V to -18 V
Supply Voltage Range — ±4.5 V to ±18 V
Control Logic — CMOS-compatible
Control Polarity — Inverted relative to DG202
Latch-Up Protection — Guaranteed with input signals connected during power-supply disconnection
Lead-Free Status — Lead Free
Production Status — PRODUCTION
Channel-On Resistance Matching — [DATA_NEEDED: channel-on resistance matching]
Off Leakage Current — [DATA_NEEDED: off leakage current]
Charge Injection — [DATA_NEEDED: charge injection]
Switching Time — [DATA_NEEDED: switching time]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध