DG441DY+T vs DG441CY+T तुलना
विस्तृत दोनों ओर की तुलना DG441DY+T द्वारा Analog Devices और DG441CY+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | DG441DY+T | DG441CY+T |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Number of Switches | 4 | — |
| Switch Configuration | 1:1 SPST | 4 x SPST, normally closed |
| On-Resistance | 85 ohm | 85 ohm maximum |
| Typical On-Resistance | 50 ohm | — |
| Positive Supply Range | +10 V to +30 V | — |
| Bipolar Supply Range | ±4.5 V to ±20 V | +/-4.5 V to +/-20 V |
| Turn-On Time | Less than 250 ns | Less than 250 ns |
| Turn-Off Time | Less than 170 ns | Less than 170 ns |
| Logic Input Compatibility | TTL and CMOS | — |
| Internal Reference | Voltage reference for logic thresholds | — |
| Process Technology | 44 V silicon-gate CMOS | 44 V silicon-gate CMOS |
| पैकेज | 16-SOIC, 0.154 inch body width | 16-lead SOIC |
| Package Length | 3.90 mm | — |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Channel Count | 4 independent channels | — |
| Legacy Compatibility | Drop-in replacement for DG201A and DG202 series devices | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Number of Channels | — | 4 channels |
| On-Resistance Matching | — | 4 ohm maximum between switches |
| On-Resistance Flatness | — | 9 ohm maximum over the signal range |
| Positive Single-Supply Range | — | +10 V to +30 V |
| Control Logic Compatibility | — | TTL and CMOS compatible |
| Signal Conduction | — | Symmetric, in either direction |
| Maximum Signal Voltage | — | [DATA_NEEDED: maximum signal voltage] |
| Maximum Switch Current | — | [DATA_NEEDED: maximum switch current] |
| Leakage Current | — | [DATA_NEEDED: leakage current] |
| Power Consumption | — | [DATA_NEEDED: power consumption] |
| REACH Status | — | [DATA_NEEDED: REACH status] |