EP2A25F724 vs EP2A40B724C7 तुलना
विस्तृत दोनों ओर की तुलना EP2A25F724 द्वारा Altera और EP2A40B724C7 द्वारा Intel. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EP2A25F724 | EP2A40B724C7 |
|---|---|---|
| ब्रांड | Altera | Intel |
| श्रेणी | Memory ICs | FPGA & CPLD |
| लाइफसाइकिल स्थिति | NRND | Obsolete |
| Device Type | Enhanced Configuration Device (EPC) | — |
| Target FPGA Family | Altera APEX II (EP2A-series) | — |
| Memory Technology | Flash (non-volatile, no battery required) | — |
| Configuration Modes | Passive Serial, Passive Parallel Async, Passive Parallel Sync | — |
| पैकेज | 724-ball FineLine BGA | 724-ball FCBGA (FineLine BGA), 35 mm x 35 mm |
| JTAG Support | IEEE Std. 1149.1 (boundary-scan / ISP) | — |
| Multi-Device Configuration | Yes - supports daisy-chained APEX II FPGAs | — |
| In-System Programmability | Yes (via JTAG) | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature grade] | 0 °C to +85 °C (commercial) |
| सप्लाई वोल्टेज | [DATA_NEEDED: VCC nominal] | — |
| On-chip Oscillator | Yes (internal configuration clock) | — |
| User Flash Region | Yes (separate from configuration data) | — |
| माउंटिंग प्रकार | Surface Mount (BGA) | Surface Mount (BGA) |
| RoHS स्थिति | Compliant | Non-compliant (lead-bearing FCBGA) |
| लाइफसाइकिल स्थिति | Not Recommended for New Designs (NRND) - Altera acquired by Intel 2015 | — |
| Family | — | APEX II |
| Logic Elements / Cells | — | 38,400 |
| Total System Gates | — | 1,500,000 |
| Embedded RAM Bits | — | 655,360 |
| Maximum User I/O | — | 540 |
| Core Supply Voltage | — | 1.425 V to 1.575 V (typ. 1.5 V) |
| Process Technology | — | 0.15 µm CMOS, up to 8 metal layers, all-layer copper |
| Maximum Internal Frequency | — | 562 MHz |
| PLLs | — | 4 |
| I/O Standards Supported | — | LVTTL, LVCMOS, 1.5 V/1.8 V/2.5 V/3.3 V, SSTL, HSTL, PCI, LVDS, LVPECL, PCML, HyperTransport, True-LVDS (1 Gbps) |
| Configuration Method | — | JTAG (IEEE 1149.1), Passive Serial, Passive Parallel, Active Serial via EPC configuration devices |
| MultiVolt I/O Support | — | 1.5 V, 1.8 V, 2.5 V, 3.3 V |
| DDR Memory Support | — | Yes (via ESB / I/O circuitry) |
| MSL स्तर | — | [DATA_NEEDED: MSL level] |