EPC1PC8-NW vs EPC1441PCB तुलना

विस्तृत दोनों ओर की तुलना EPC1PC8-NW द्वारा Intel और EPC1441PCB द्वारा Altera. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Intel
EPC1PC8-NW EPC1PC8-NW - 1Mb OTP Configuration PROM 8-PDIP | Intel / Altera

EPC1PC8-NW - 1Mb OTP Configuration PROM 8-PDIP | Intel / Altera

EPC1PC8-NW ✓ सक्रिय

विशेषता तुलना

पैरामीटर EPC1PC8-NW EPC1441PCB
ब्रांड Intel Altera
श्रेणी Memory ICs FPGA & CPLD
लाइफसाइकिल स्थिति सक्रिय Obsolete
Product Type OTP Configuration PROM (one-time programmable) —
मेमोरी आकार 1 Mbit (1,046,496 bits) —
इंटरफ़ेस Altera / Intel serial configuration (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) —
Supply Voltage (VCC) 3.0 V to 5.5 V (3.3 V or 5 V nominal) 3.3 V nominal
पैकेज 8-pin PDIP (300-mil body, through-hole) PLCC-20 (Plastic Leaded Chip Carrier)
पिन काउंट 8 —
Configuration Mode Support Passive Serial (PS) for FLEX, APEX, Mercury, Cyclone families —
Oscillator Internal ring oscillator (EPC1/EPC1441 only; EPC2 uses external clock) —
JTAG Boundary-Scan Support No (EPC2 family only) —
Programming Method Altera ByteBlasterMV, BitBlaster, or compatible USB-Blaster via Quartus / MAX+PLUS II —
Lead Finish Pb-free matte tin (JEDEC J-STD-020 compliant) —
ऑपरेटिंग तापमान 0C to +70C (commercial) 0 C to +70 C (commercial)
MSL स्तर MSL 2 (per JEDEC J-STD-020) —
RoHS स्थिति Compliant (Pb-free -NW suffix) [DATA_NEEDED: RoHS compliance status]
Manufacturer Intel (formerly Altera Corporation) —
Compatible FPGA Families FLEX 10K, APEX 20K, Mercury, Cyclone, MAX 7000S/AE/B —
Device Type — Enhanced Configuration Device for SRAM FPGAs
Memory Density — 4,435,200 bits (~4 Mb)
Supported FPGA Families — ACEX 1K, APEX 20K, APEX II, FLEX 10K, FLEX 6000, FLEX 8000, Mercury
Programmability — In-system programmable via JTAG (IEEE 1149.1)
Configuration Interface — Altera serial/parallel configuration bus (nSTATUS, nCONFIG, DCLK, DATA)
I/O Voltage Tolerance — 5 V tolerant
माउंटिंग प्रकार — Surface Mount / Socket
Configuration Mode — Automatic at power-up
Architecture — Flash memory + on-chip configuration controller
JTAG Support — Yes (IEEE 1149.1 boundary scan)
Lead-Free — [DATA_NEEDED: lead-free status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध