EPC1PC8-NW vs EPC1PC8 तुलना
विस्तृत दोनों ओर की तुलना EPC1PC8-NW द्वारा Intel और EPC1PC8 द्वारा Altera. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EPC1PC8-NW | EPC1PC8 |
|---|---|---|
| ब्रांड | Intel | Altera |
| श्रेणी | Memory ICs | Memory ICs |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Product Type | OTP Configuration PROM (one-time programmable) | — |
| मेमोरी आकार | 1 Mbit (1,046,496 bits) | 1 Mbit (1,048,576 bits) |
| इंटरफ़ेस | Altera / Intel serial configuration (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) | — |
| Supply Voltage (VCC) | 3.0 V to 5.5 V (3.3 V or 5 V nominal) | 5.0 V (typical) |
| पैकेज | 8-pin PDIP (300-mil body, through-hole) | 8-pin PDIP (8-PDIP, 300 mil) |
| पिन काउंट | 8 | — |
| Configuration Mode Support | Passive Serial (PS) for FLEX, APEX, Mercury, Cyclone families | — |
| Oscillator | Internal ring oscillator (EPC1/EPC1441 only; EPC2 uses external clock) | — |
| JTAG Boundary-Scan Support | No (EPC2 family only) | — |
| Programming Method | Altera ByteBlasterMV, BitBlaster, or compatible USB-Blaster via Quartus / MAX+PLUS II | — |
| Lead Finish | Pb-free matte tin (JEDEC J-STD-020 compliant) | — |
| ऑपरेटिंग तापमान | 0C to +70C (commercial) | 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range] |
| MSL स्तर | MSL 2 (per JEDEC J-STD-020) | [DATA_NEEDED: moisture sensitivity level] |
| RoHS स्थिति | Compliant (Pb-free -NW suffix) | [DATA_NEEDED: RoHS compliance status] |
| Manufacturer | Intel (formerly Altera Corporation) | — |
| Compatible FPGA Families | FLEX 10K, APEX 20K, Mercury, Cyclone, MAX 7000S/AE/B | — |
| मेमोरी प्रकार | — | OTP Configuration PROM (Non-volatile) |
| Configuration Interface | — | Altera proprietary serial (DATA, DCLK, OE, nCS) |
| Programmability | — | One-Time Programmable (OTP) |
| माउंटिंग प्रकार | — | Through-Hole (THT) |
| Target FPGAs | — | ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A |
| Pin Pitch | — | 2.54 mm (0.100 in) |
| Programming Hardware | — | Altera MasterBlaster / ByteBlaster (legacy programmer) |
| Configuration Mode | — | Serial (1-bit data, 1-bit clock) |
| Lead-Free | — | [DATA_NEEDED: lead-free / SnPb plating] |