EPC8QI100N vs EPC8QC100N तुलना

विस्तृत दोनों ओर की तुलना EPC8QI100N द्वारा Altera और EPC8QC100N द्वारा Intel. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

विशेषता तुलना

पैरामीटर EPC8QI100N EPC8QC100N
ब्रांड Altera Intel
श्रेणी EEPROM Memory ICs
लाइफसाइकिल स्थिति NRND Obsolete
Manufacturer Altera (Intel) —
Part Family EPC8 (Enhanced Configuration) —
Device Type Configuration PROM for SRAM-based FPGAs —
मेमोरी आकार 8 Mbit (8,388,608 bits) 8 Mbit (8,388,608 bits)
Programmable Type In System Programmable (Flash) —
Configuration Interface Altera serial (4-wire: DATA, DCLK, nCS, nINIT_CONF) —
Maximum Configuration Clock 50 MHz 66.7 MHz
On-Chip Decompression Yes (Altera compression algorithm) —
Supply Voltage (VCC) 3.0 V to 3.6 V 3.0 V to 3.6 V (typ. 3.3 V)
ऑपरेटिंग तापमान -40 °C to +85 °C (Industrial) 0 C to +70 C (commercial, N suffix)
पैकेज 100-PQFP / 100-BQFP (20 x 14 mm) —
पिन काउंट 100 100
माउंटिंग प्रकार Surface Mount —
Lead-Free / RoHS Yes (per distributor listings) —
JTAG (IEEE 1149.1) ISP Supported —
Multi-Device Daisy-Chain Supported —
Target FPGA Families ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, Stratix II GX —
Packaging Tray —
मेमोरी प्रकार — Flash (NOR, configuration PROM)
संगठन — 512K words x 16 bits
Configuration Device Family — EPC8 (Enhanced Configuration Device)
Programmability — IEEE Std. 1532 in-system programmable (ISP)
Programming Interface — JTAG (IEEE 1149.1) + Jam STAPL
Package Type — Plastic Quad Flat Pack (PQFP-100)
nINIT_CONF Pin — Yes (private JTAG instruction to start FPGA configuration)
Compatible FPGAs — Altera Stratix, Stratix GX, Cyclone, APEX 20K series
RoHS स्थिति — [DATA_NEEDED: RoHS compliance status]
MSL स्तर — [DATA_NEEDED: Moisture Sensitivity Level]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध