INA101AG vs INA101AM तुलना
विस्तृत दोनों ओर की तुलना INA101AG द्वारा Texas Instruments और INA101AM द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
INA101AM - Very High Accuracy Instrumentation Amplifier | Texas Instruments
INA101AM ✓ सक्रियविशेषता तुलना
| पैरामीटर | INA101AG | INA101AM |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Channels | 1 | 1 channel |
| Input Offset Voltage (max) | 25 uV | — |
| Offset Drift (max) | 0.25 uV/C | — |
| Nonlinearity (max) | 0.002% | — |
| Input Noise Density | 13 nV/rtHz | — |
| Common-Mode Rejection | 106 dB at 60 Hz | — |
| Input Impedance | 10^10 ohm | 10 GΩ |
| Bandwidth | 300 kHz | Approximately 300 kHz |
| Slew Rate | 0.04 V/us | — |
| Supply Voltage Range | +/-5 V to +/-20 V | Approximately ±5 V to ±20 V; exact operating limits are [DATA_NEEDED: supply voltage range] |
| पैकेज | 14-CDIP (0.300", 7.62 mm) | TO-100-10 |
| माउंटिंग प्रकार | Through Hole | Through-hole |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | — |
| Architecture | Three-op-amp, laser-trimmed metal-film resistors | Three precision operational amplifiers with laser-trimmed metal-film resistors |
| Applications | Strain gages, thermocouples, RTDs, remote transducers | — |
| Product Type | — | Instrumentation Amplifier |
| Input Type | — | Differential |
| Maximum Supply Voltage | — | ±20 V |
| Offset Voltage | — | 25 mV maximum |
| Input Drift | — | 0.25 mV/°C maximum |
| Nonlinearity | — | 0.002% |
| नॉइज़ डेंसिटी | — | 13 nV/√Hz |
| Common-Mode Rejection Ratio | — | 106 dB at 60 Hz |
| Application Areas | — | Strain gauges, thermocouples, RTDs, remote sensors, and general-purpose data acquisition |
| RoHS स्थिति | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |