INA121UA vs INA131BP तुलना
विस्तृत दोनों ओर की तुलना INA121UA द्वारा Texas Instruments और INA131BP द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | INA121UA | INA131BP |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Instrumentation Amplifier (FET-input) | — |
| Number of Channels | 1 | — |
| Gain Range | 1 V/V to 10,000 V/V (external resistor) | — |
| Bandwidth (G = 100) | 600 kHz | — |
| Slew Rate | 0.07 V/us | 0.7 V/µs |
| Input Bias Current | ±4 pA (max) | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | ±200 uV (max) | [DATA_NEEDED: input offset voltage] |
| Input Offset Drift | ±2 uV/°C (max) | — |
| Input Voltage Noise Density | 100 nV/sqrt(Hz) [DATA_NEEDED: confirmation of exact frequency] | — |
| CMRR | 106 dB (min) | — |
| Nonlinearity (G = 100) | 0.001% (max) | — |
| क्वाइसेंट करंट | ±450 uA | — |
| Supply Voltage Range | ±2.25 V to ±18 V (dual) / 4.5 V to 36 V (single) | 2.25 V to 18 V |
| Input Protection | ±40 V differential and common-mode | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: confirmed range] | — |
| पैकेज | 8-pin SOIC (D) | — |
| माउंटिंग प्रकार | Surface Mount | — |
| RoHS स्थिति | Compliant (per DigiKey product page) | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Internal Amplifier Count | — | 3 amplifiers |
| Nominal Gain | — | 100 V/V |
| Gain Configuration | — | Fixed gain |
| Maximum Total Supply Voltage | — | 50 V |
| Signal Bandwidth | — | 70 kHz |
| Adjustment Method | — | On-chip laser trimming |
| Number of Circuits | — | 1 circuit |
| Package Type | — | 8-pin PDIP |
| पिन की संख्या | — | 8 pins |
| माउंटिंग स्टाइल | — | Through-hole |
| Temperature Grade | — | Industrial grade |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power Supply Rejection Ratio | — | [DATA_NEEDED: power supply rejection ratio] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Quiescent Current per Channel | — | [DATA_NEEDED: quiescent current per channel] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |